Corsa elite problems.

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
93notch408
BMX
BMX
Posts: 27
Joined: Sun Sep 27, 2015 2:48 pm
Location: Dearborn Michigan

Corsa elite problems.

Post by 93notch408 »

I have a 94 elite s that I put a ported corsa on the mods are..
Ported by Joe corsa
Noroku intake mani byson cf reeds
Ported window
24mm oko 48/120 jet
9.1 gears
Pg short
5.6 gram weights
Molossi variator
1500 rpm contra
Aftermarket China clutch 5k rpm stall
The bike seen a peak of like 340 degrees of about a mile of full thrattle I know it's a little rich but I only got it to 54 mph I've read on here that people are going 65 plus on corsas but I'm not seeing that I tried 7 gram rollers and the bike took off like a pig like I coulda walked faster I wasno air leaks that I kno of I'm stumped I had a 2k contra changed it to a 1500 yellow one tomarrow I'm gonna try a 115 main to see if that will make a diff any help is greatly appreciated
Last edited by 93notch408 on Thu Apr 28, 2016 1:20 am, edited 1 time in total.
93notch408
BMX
BMX
Posts: 27
Joined: Sun Sep 27, 2015 2:48 pm
Location: Dearborn Michigan

Re: Corsa elite problems.

Post by 93notch408 »

Sorry about the spelling lol
Peteyparado
Spree
Spree
Posts: 280
Joined: Fri Feb 26, 2016 4:02 am
Location: Hawaii

Re: Corsa elite problems.

Post by Peteyparado »

What kinds of rpms you seeking at top speed?
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
93notch408
BMX
BMX
Posts: 27
Joined: Sun Sep 27, 2015 2:48 pm
Location: Dearborn Michigan

Re: Corsa elite problems.

Post by 93notch408 »

10,680 was top
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Corsa elite problems.

Post by Wheelman-111 »

Greetings:

120 to 115 is a pretty big jump. 340F. may be a little below the temps you'd see at peak power, but not very much. Consider obtaining a 118 or something in-between, lest your temps spike too quickly and it seize. I've always felt that 9:1 gears are fine for modest mods or a stock 50cc displacement, but if you want top speed you might consider a little taller. To reach high speeds with 9:1s your engine has to spin a lot faster than the PG Short can support. 10,550 or so is all I could get with my very similar Flash 3.26. The difference was that I was running 7.97s in the transmission.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3592
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Re: Corsa elite problems.

Post by burnt_toast »

often overlooked, but what belt are you running? is it using up all of variator face? best way to check is draw a line w/ a sharpie anywhere on vari face, then see how much of it is left toward edge after a ride. 54 def sounds low for that setup..
projects galore :nerd:
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Corsa elite problems.

Post by MrJumps »

93notch408 wrote: Molossi variator

Aftermarket China clutch 5k rpm stall
The aftermarket clutch may be wrong, if you did the pully too.
1993 ch80, swapped with a ch250
2021 DRZ400sm :worship:
93notch408
BMX
BMX
Posts: 27
Joined: Sun Sep 27, 2015 2:48 pm
Location: Dearborn Michigan

Re: Corsa elite problems.

Post by 93notch408 »

I have a prodigy variator in it now 5.6 gram weights still but I put a 115 jet in it instead of a 120 and gained 5 mph and temp was at 340 it felt like it shifted at about 10,800 rpm and dropped to 9800 my friend says I need a stronger contra I have a 1500 I'm gonna put the red 2k back in I'm thinking the jetting was just way rich and not letting it rev cause it feels like a diff animal now
89hatcher
BMX
BMX
Posts: 39
Joined: Thu Feb 26, 2015 2:47 pm
Location: hawaii

Re: Corsa elite problems.

Post by 89hatcher »

d*** my stock corsa with 7.2:1 gearing hit 75mph lol and im running a 28mm polini carb. stretch was about .7 miles
Hppowdercoatings
Board Supporter
Board Supporter
Posts: 343
Joined: Mon Apr 28, 2014 8:55 am
Location: Wentzville,Mo

Re: Corsa elite problems.

Post by Hppowdercoatings »

On my 72cc ported Corsa I'm running a 24mm Polini 105/40 Jetting..
Post Reply