Spree bbk issues.
Moderator: Moderator
-
- Goped
- Posts: 60
- Joined: Wed Nov 11, 2015 10:40 am
- Location: minneasota
Re: Spree bbk issues.
HOW DO I GET NE PISTON RINGS FOR THIS KIT? I DESPERATELY NEED!!! I'D EVEN GET A NEW PISTON AND RING KIT. I HAVE 3 JUGS. 2 GOOD PISTONS ... ONE SET OF RINGS. I'VE GOTTEN 3K... BUT GET A BIG CARB AND ADAPTER/INTAKE
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
-
- Goped
- Posts: 60
- Joined: Wed Nov 11, 2015 10:40 am
- Location: minneasota
Re: Spree bbk issues.
I've run this kit up to 385 no problem. Just don't go over 400 or dead baby..
If you don't have a bigger intake yet do it. If you look into the math, the intake of the spree is waaaay too small for that size kit.
If you don't have a bigger intake yet do it. If you look into the math, the intake of the spree is waaaay too small for that size kit.
-
- Goped
- Posts: 60
- Joined: Wed Nov 11, 2015 10:40 am
- Location: minneasota
Re: Spree bbk issues.
Yes eclark. That is what I meant. Lol hope you get it fixed!
Re: Spree bbk issues.
stevespree7 wrote:I've run this kit up to 385 no problem. Just don't go over 400 or dead baby..
If you don't have a bigger intake yet do it. If you look into the math, the intake of the spree is waaaay too small for that size kit.
350*F max those bores are cast iron, but the pistons are aluminium. Your gonna melt at about 360*f at 400*f your gonna have a rod push its way through the soft piston.
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm
-
- Goped
- Posts: 60
- Joined: Wed Nov 11, 2015 10:40 am
- Location: minneasota
Re: Spree bbk issues.
Dang... well I lucky ... wow. Hahah up jet time!
Re: Spree bbk issues.
My Taiwan bore locked up at 380-ish
I need to find some new haters...the ones I have are starting to like me.
Re: Spree bbk issues.
Yeah 380 is when I had a soft seize too. As for the race bores out of Italian areas they can withstand a major amount of blunt trama.
1993 ch80, swapped with a ch250
2021 DRZ400sm
2021 DRZ400sm