125cc Stroker 28mm OKO Baseline

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3531
Joined: Sat Jul 31, 2004 8:00 pm
Location: SA, Texas

125cc Stroker 28mm OKO Baseline

Post by burnt_toast » Thu Nov 02, 2017 4:12 pm

Looking for baseline jetting suggestions for a 125cc stroker and 28mm OKO carb combo. Been searching old posts and find mostly results for 30 and 32mm carbs.

Will be running 93oct and 32:1 premix with Castor927, 650' above sea level.

Trying to set it up for drag racing this weekend and strapped for time, any input is appreciated!!
'87 Elite SE50 -125cc, sleeper swap ratrod
'93 Elite SR50 -65cc mildmod, In Progress
'98 Elite S SA50P -Black Bee- 50cc, 9:1
'01 Vino, naked racer/showboat

User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3531
Joined: Sat Jul 31, 2004 8:00 pm
Location: SA, Texas

Re: 125cc Stroker 28mm OKO Baseline

Post by burnt_toast » Fri Nov 03, 2017 9:10 am

scratch that. china sent me wrong carb.. 26mm PWK instead of 28mm OKO :x

tryin to make it work..
'87 Elite SE50 -125cc, sleeper swap ratrod
'93 Elite SR50 -65cc mildmod, In Progress
'98 Elite S SA50P -Black Bee- 50cc, 9:1
'01 Vino, naked racer/showboat

User avatar
benji
CB900F
CB900F
Posts: 1669
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: 125cc Stroker 28mm OKO Baseline

Post by benji » Mon Nov 13, 2017 11:48 am

Post pics. If it's a clone don't bother man, more headache than it's worth imo.

Post Reply