Not getting all the way on pipe
Moderator: Moderator
-
- Spree
- Posts: 101
- Joined: Sat Jan 25, 2014 6:25 pm
- Location: Colleyville, TX
Re: Not getting all the way on pipe
I have almost identical setup now, just installed Corsa jug, Malossi crank, Arrow pipe and running OKO 24mm carb. I had trouble getting on the pipe with 125 main. Tried 135 and it was just as bad. Dropped in a 110 and it came to life. Neighbors not happy I'm running without a muffler but this this is quick and loud! Still breaking in so no full throttle yet, even half throttle it is 10,500 before dropping down (5.6g rollers). Feels super solid.
- nateberrier
- Spree
- Posts: 164
- Joined: Wed Jul 10, 2019 2:01 pm
- Location: Louisville
Re: Not getting all the way on pipe
I was too fat on the main jet, it goes like * with a 108 in it. Only wants to hang at 10500 but it's firmly on it. Also did zx trans
1986 Aero White -- Stock With Keli Var
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank