aero 50 with bbk polini carb suggestion

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
Txaero121
BMX
BMX
Posts: 28
Joined: Fri Feb 11, 2022 9:17 pm

aero 50 with bbk polini carb suggestion

Post by Txaero121 »

should i go with the 19mm or the 17mm polini cp?
bike has malossi bbk, ported intake + dual stage reeds , s23 pipe . keli variator +koso ramp plate
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: aero 50 with bbk polini carb suggestion

Post by Wheelman-111 »

Greetings:

The 19mm .
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Txaero121
BMX
BMX
Posts: 28
Joined: Fri Feb 11, 2022 9:17 pm

Re: aero 50 with bbk polini carb suggestion

Post by Txaero121 »

Thank you thats what I was thinking myself . How about the 21? Any thoughts on that or is it overkill ?
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: aero 50 with bbk polini carb suggestion

Post by Wheelman-111 »

Greetings:

Never tried it. Mine had the stock intake and a 17.5mm Arreche carb that fit the stock mount. Never Quite documented 60 MPH with 7.83:1 gears but super easy to tune. Several members at the time (2009?) said I shoulda got the 19. 21mm carb for 65cc might be a bit much unless ported and piped for higher revs.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Txaero121
BMX
BMX
Posts: 28
Joined: Fri Feb 11, 2022 9:17 pm

Re: aero 50 with bbk polini carb suggestion

Post by Txaero121 »

So I got the cp 19mm kit with all the accessories and jets needed along with a stage 6 dio big valve intake kit and the swap shop adapter. I'm in Houston what should I start my jetting at? I know I saw a video where swap shop said the 40 pilot it comes with is way to big. And I think I saw a swap shop post where they say start at 100main. Thinking 36 pilot and 100 main
Post Reply