86 Main Jet

darat · Post by **darat** » Thu Sep 08, 2005 9:45 am

can i put a 86 main jet in a spree? would it make a difference

Post by **noiseguy** » Thu Sep 08, 2005 2:24 pm

You could, but I doubt it would do much more than use more gas. Richer jetting seems to only be required for modifications to the intake, i.e. a pod filter.

darat · Post by **darat** » Thu Sep 08, 2005 8:36 pm

so if i have a intake done then i would run better. by the way my spree allready has the intake done. this is for my friend

MYSTERE1 · Post by **MYSTERE1** » Thu Sep 08, 2005 10:32 pm

I use a #80 jet in my spree. I have a K&N cone filter and a de restricted intake.

Try it and see. You may run way to rich though if you don't have a very modded spree.

Justinsane · Post by **Justinsane** » Fri Sep 09, 2005 3:18 pm

MYSTERE1, is that the only mod you use on your stock spree? if so, does it make a difference? im looking into this mod myself

MySpree · Post by **MySpree** » Fri Sep 09, 2005 5:13 pm

i have a #65 i have a 68 but when i redueced it it made my spree rocker so much faster!

MYSTERE1 · Post by **MYSTERE1** » Fri Sep 09, 2005 11:47 pm

Hummm, I think this may be something to do with my elevation. but my spree came stock with a # 68 main jet.

Justinsane wrote:

MYSTERE1, is that the only mod you use on your stock spree? if so, does it make a difference? im looking into this mod myself

please look below.
V V V V

vette76 · Post by **vette76** » Sat Sep 10, 2005 12:08 am

#68 shouldnt hurt. my elite sb engine has a #68 stock and its the same as the spree engine.

wickedSpree · Post by **wickedSpree** » Tue Nov 15, 2005 10:00 pm

I put a bigger jet in my spree and it ran like s***. It was not going as fast and it would bog out at full throttle.