the next step: just gears? big bore? ADVICE PLEASE
Moderator: Moderator
-
- Spree
- Posts: 240
- Joined: Sat Sep 27, 2008 2:09 am
- Location: Bathroom
Re: the next step: just gears? big bore? ADVICE PLEASE
Make sure you invest in a CHT gauge at some point. Grats on your purchase.
Reliable and dependable tuning from 15+ years of experience.
Re: the next step: just gears? big bore? ADVICE PLEASE
any recommendations?
-
- Spree
- Posts: 240
- Joined: Sat Sep 27, 2008 2:09 am
- Location: Bathroom
Re: the next step: just gears? big bore? ADVICE PLEASE
Westach 2C1 CHT gauge.
Be sure to buy a 2 inch L bracket mount and the Westach backlight kit.
Be sure to buy a 2 inch L bracket mount and the Westach backlight kit.
Reliable and dependable tuning from 15+ years of experience.
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: the next step: just gears? big bore? ADVICE PLEASE
It is an awesome gauge, for just CHT I highly recommend it. will help you with tuning and wont need to do plug chops, just dont forget to get large assortment of jets too laterArnadanoob wrote:Westach 2C1 CHT gauge.
Be sure to buy a 2 inch L bracket mount and the Westach backlight kit.
projects galore
Re: the next step: just gears? big bore? ADVICE PLEASE
This gauge is awesome. It does peak hold. Digital readout for precise degrees. Perfect for cruising to getting a scooter dialed in 100%. Hope this helps you out
http://tscsensors.com/pmdrd0000000ao0anal.html
This is the CHT also Does EGT 89.99 or off ebay for 56.00 i think
http://tscsensors.com/chtws0722p0kssnchts.html
This is a 14mm Type K Thermocouple with 6foot cable.
response time is 1500 milliseconds.
Here is a link to my video. Sorry its kinda of ghetto right now but i went and got some Velcro and I was able hide the wires
http://www.youtube.com/watch?v=RjXzIeBwoAs
Hope this helps you out
http://tscsensors.com/pmdrd0000000ao0anal.html
This is the CHT also Does EGT 89.99 or off ebay for 56.00 i think
http://tscsensors.com/chtws0722p0kssnchts.html
This is a 14mm Type K Thermocouple with 6foot cable.
response time is 1500 milliseconds.
Here is a link to my video. Sorry its kinda of ghetto right now but i went and got some Velcro and I was able hide the wires
http://www.youtube.com/watch?v=RjXzIeBwoAs
Hope this helps you out
Re: the next step: just gears? big bore? ADVICE PLEASE
thanks for the help guys! I'll probably be getting a gauge in a couple months, after breakin