WILL IT WORK?

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
maddog
CB900F
CB900F
Posts: 2228
Joined: Mon Jul 23, 1973 10:24 am

Post by maddog »

Remember that you are working with a 49cc engine and while you can build power & compression, it needs to be transferred to the trans & final drive unless you access to a cnc machine to custom fabricate some gears you are limited!
some people dream of speed, i own your dreams!
Top
User avatar
noiseguy
Site Admin
Site Admin
Posts: 4419
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:
Contact noiseguy

Post by noiseguy »

Did you know there are 2 different gear sets used for Spree? A 13T pinion and a 12T, I believe, with a matching larger gear. I believe the lower ratio (faster) was used '87 only. The ratio is published in the Spree service manual, a check of Honda parts shows a different set of p/n for these gears.
Admin, Hondaspree.net

Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Top
User avatar
KillinSpree
Elite
Elite
Posts: 592
Joined: Mon Jul 23, 1973 10:24 am
Location: Sylvania, OH

spree

Post by KillinSpree »

Dam so that would make your spree go even faster huh?
Top
maddog
CB900F
CB900F
Posts: 2228
Joined: Mon Jul 23, 1973 10:24 am

Post by maddog »

Not really, as most most scooters have a 12t ratio but every gram that you can plus/ minus in a 2 stroke creats power, just do it the right way.
some people dream of speed, i own your dreams!
Top
Post Reply

Return to “Performance Technical”