1987 elite SE50P de-restrict

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

User avatar
jlynn433
Spree
Spree
Posts: 191
Joined: Thu Jul 14, 2011 9:03 pm
Location: Macomb, MI

Re: 1987 elite SE50P de-restrict

Post by jlynn433 »

where is the hole that is plugged on the sa50p airbox? i want to fully derestrict the bike and this is the only thing left
'00 Honda Elite S.....................'06 Yamaha Zuma
-80cc Taiwanese BBK...............-Taiwan pwr pkg
-Malossi Vari
-6.9:1 Primary gears
-High Energy Ignition Coil
-Carbon Fiber Reeds
-Chrome CT Mani
-28mm OKO Carb
-Uni Pod Filter
-PG Long pipe
DERP
BMX
BMX
Posts: 43
Joined: Wed Aug 03, 2011 1:11 am
Location: DERPAINA

Re: 1987 elite SE50P de-restrict

Post by DERP »

picked up a 87 se50p today, i see the restricted exhaust and can only assume it has the restricted plate granted the high 20s speed.

im pretty familiar with cvts however, does anybody recommend one variator/plate over another? Can i just take off the restricted plate ?

anybody have one they are looking to get rid of? :peace:
User avatar
evilone
Board Supporter
Board Supporter
Posts: 3205
Joined: Sun May 18, 2008 7:26 pm
Location: Portage Michigan

Re: 1987 elite SE50P de-restrict

Post by evilone »

DERP wrote:Can i just take off the restricted plate ?
What will you use for a plate if you remove it? The ramp plate needs replaced not removed. Get a Keli variator and a non-restricted ramp plate.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis

I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
DERP
BMX
BMX
Posts: 43
Joined: Wed Aug 03, 2011 1:11 am
Location: DERPAINA

Re: 1987 elite SE50P de-restrict

Post by DERP »

thanks for the reply do you think i would see around 50mph with a 65mm big bore kit, new ramp, and the variator?

http://cgi.ebay.com/ebaymotors/AIRSAL-6 ... arQ5fParts
User avatar
evilone
Board Supporter
Board Supporter
Posts: 3205
Joined: Sun May 18, 2008 7:26 pm
Location: Portage Michigan

Re: 1987 elite SE50P de-restrict

Post by evilone »

Yes you should see 50 mph. Forum member martynkim does it without a big bore.

You're going to get an unrestricted pipe right?
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis

I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
DERP
BMX
BMX
Posts: 43
Joined: Wed Aug 03, 2011 1:11 am
Location: DERPAINA

Re: 1987 elite SE50P de-restrict

Post by DERP »

planned on making a pipe at school



but wait a hoot


http://www.partsforscooters.com/169-210 ... gory=74117#

does this kit work on the se50p?
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: 1987 elite SE50P de-restrict

Post by Trafficjamz »

DERP wrote:planned on making a pipe at school



but wait a hoot


http://www.partsforscooters.com/169-210 ... gory=74117#

does this kit work on the se50p?
nope

That is a kit for a yamaha horizontal engine.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
DERP
BMX
BMX
Posts: 43
Joined: Wed Aug 03, 2011 1:11 am
Location: DERPAINA

Re: 1987 elite SE50P de-restrict

Post by DERP »

dam saw 10mm wrist pin and got all excited lol

thanks for the tip
that1mopedguy
Goped
Goped
Posts: 51
Joined: Mon Sep 19, 2011 3:08 pm
Location: Fruitport, MI

Re: 1987 elite SE50P de-restrict

Post by that1mopedguy »

i already have an un-restricted muffler on my 89' sb50p. is it possible for me to get a keli variator too?
User avatar
Mystic
CB900F
CB900F
Posts: 2584
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: 1987 elite SE50P de-restrict

Post by Mystic »

absolutely not :P your best bet for more speed on the sb50 is to swap in a variated engine
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
that1mopedguy
Goped
Goped
Posts: 51
Joined: Mon Sep 19, 2011 3:08 pm
Location: Fruitport, MI

Re: 1987 elite SE50P de-restrict

Post by that1mopedguy »

where can i get a variated engine?
User avatar
Mystic
CB900F
CB900F
Posts: 2584
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: 1987 elite SE50P de-restrict

Post by Mystic »

first and best place to look is your local salvage or junkyard :D your best bet is an af16e "dio" motor from a 94-2001 honda elite or the variated af05 from an 87 elite se50, 88-93 Sa50 elite or Aero nb50
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
that1mopedguy
Goped
Goped
Posts: 51
Joined: Mon Sep 19, 2011 3:08 pm
Location: Fruitport, MI

Re: 1987 elite SE50P de-restrict

Post by that1mopedguy »

kk. cool. thanks :smile: i'll keep an eye out and look around. let me know if u can find one too. lol
error1exe
Noob
Noob
Posts: 15
Joined: Mon Sep 26, 2011 5:35 pm
Location: MI

Re: 1987 elite SE50P de-restrict

Post by error1exe »

evilone wrote:How to remove restrictions from 1987 SE50P. These are the major restrictions. Muffler does not have a washer to drill out and restricted ramp plate ramps are flat, muffler and ramp plate need replaced with non-restricted.

Restricted SE50P ramp plate
Image

Un-restricted SE50 ramp plate
Image

Restricted SE50P muffler
Image

Un-restricted SE50 muffler
Image


were would i go to find those parts?
User avatar
evilone
Board Supporter
Board Supporter
Posts: 3205
Joined: Sun May 18, 2008 7:26 pm
Location: Portage Michigan

Re: 1987 elite SE50P de-restrict

Post by evilone »

Here or ebay
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis

I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Post Reply