1987 elite SE50P de-restrict
Moderator: Moderator
Re: 1987 elite SE50P de-restrict
where is the hole that is plugged on the sa50p airbox? i want to fully derestrict the bike and this is the only thing left
'00 Honda Elite S.....................'06 Yamaha Zuma
-80cc Taiwanese BBK...............-Taiwan pwr pkg
-Malossi Vari
-6.9:1 Primary gears
-High Energy Ignition Coil
-Carbon Fiber Reeds
-Chrome CT Mani
-28mm OKO Carb
-Uni Pod Filter
-PG Long pipe
-80cc Taiwanese BBK...............-Taiwan pwr pkg
-Malossi Vari
-6.9:1 Primary gears
-High Energy Ignition Coil
-Carbon Fiber Reeds
-Chrome CT Mani
-28mm OKO Carb
-Uni Pod Filter
-PG Long pipe
Re: 1987 elite SE50P de-restrict
picked up a 87 se50p today, i see the restricted exhaust and can only assume it has the restricted plate granted the high 20s speed.
im pretty familiar with cvts however, does anybody recommend one variator/plate over another? Can i just take off the restricted plate ?
anybody have one they are looking to get rid of?
im pretty familiar with cvts however, does anybody recommend one variator/plate over another? Can i just take off the restricted plate ?
anybody have one they are looking to get rid of?
Re: 1987 elite SE50P de-restrict
What will you use for a plate if you remove it? The ramp plate needs replaced not removed. Get a Keli variator and a non-restricted ramp plate.DERP wrote:Can i just take off the restricted plate ?
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Re: 1987 elite SE50P de-restrict
thanks for the reply do you think i would see around 50mph with a 65mm big bore kit, new ramp, and the variator?
http://cgi.ebay.com/ebaymotors/AIRSAL-6 ... arQ5fParts
http://cgi.ebay.com/ebaymotors/AIRSAL-6 ... arQ5fParts
Re: 1987 elite SE50P de-restrict
Yes you should see 50 mph. Forum member martynkim does it without a big bore.
You're going to get an unrestricted pipe right?
You're going to get an unrestricted pipe right?
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Re: 1987 elite SE50P de-restrict
planned on making a pipe at school
but wait a hoot
http://www.partsforscooters.com/169-210 ... gory=74117#
does this kit work on the se50p?
but wait a hoot
http://www.partsforscooters.com/169-210 ... gory=74117#
does this kit work on the se50p?
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 1987 elite SE50P de-restrict
nopeDERP wrote:planned on making a pipe at school
but wait a hoot
http://www.partsforscooters.com/169-210 ... gory=74117#
does this kit work on the se50p?
That is a kit for a yamaha horizontal engine.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: 1987 elite SE50P de-restrict
dam saw 10mm wrist pin and got all excited lol
thanks for the tip
thanks for the tip
-
- Goped
- Posts: 51
- Joined: Mon Sep 19, 2011 3:08 pm
- Location: Fruitport, MI
Re: 1987 elite SE50P de-restrict
i already have an un-restricted muffler on my 89' sb50p. is it possible for me to get a keli variator too?
Re: 1987 elite SE50P de-restrict
absolutely not your best bet for more speed on the sb50 is to swap in a variated engine
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Goped
- Posts: 51
- Joined: Mon Sep 19, 2011 3:08 pm
- Location: Fruitport, MI
Re: 1987 elite SE50P de-restrict
where can i get a variated engine?
Re: 1987 elite SE50P de-restrict
first and best place to look is your local salvage or junkyard your best bet is an af16e "dio" motor from a 94-2001 honda elite or the variated af05 from an 87 elite se50, 88-93 Sa50 elite or Aero nb50
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Goped
- Posts: 51
- Joined: Mon Sep 19, 2011 3:08 pm
- Location: Fruitport, MI
Re: 1987 elite SE50P de-restrict
kk. cool. thanks i'll keep an eye out and look around. let me know if u can find one too. lol
Re: 1987 elite SE50P de-restrict
evilone wrote:How to remove restrictions from 1987 SE50P. These are the major restrictions. Muffler does not have a washer to drill out and restricted ramp plate ramps are flat, muffler and ramp plate need replaced with non-restricted.
Restricted SE50P ramp plate
Un-restricted SE50 ramp plate
Restricted SE50P muffler
Un-restricted SE50 muffler
were would i go to find those parts?
Re: 1987 elite SE50P de-restrict
Here or ebay
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.