Using Royal Purple oil

uspmale · Post by **uspmale** » Sun Feb 19, 2006 5:12 am

Contacted seller on e-bay and he mentioned that case price was with free shipping. Maybe 6 members could chip in and split the cost.
A case consist of 12 quarts.

uspmale · Post by **uspmale** » Sun Feb 19, 2006 5:13 am

Contacted seller on e-bay and he mentioned that case price was with free shipping. Maybe 6 members could chip in and split the cost.
A case consist of 12 quarts.

darat · Post by **darat** » Sun Feb 19, 2006 1:19 pm

Not a bad idea...

JF · Post by JF » Sun Feb 19, 2006 2:22 pm

I agree, and that way more people can get to try out Royal Purple in their bikes. Like I said in another post; If you buy in bulk, you can be saving a lot of money. Just need to get the up-front cost out of the way first...

Good idea Greg,
JF

darat · Post by **darat** » Sun Feb 19, 2006 2:28 pm

i would buy some..

85spreeelite · Post by **85spreeelite** » Sun Feb 19, 2006 3:24 pm

I got a bottle of from advanced auto for $11.00

darat · Post by **darat** » Sun Feb 19, 2006 3:33 pm

for the two stroke injector type?

darat · Post by **darat** » Sat Feb 25, 2006 1:20 am

So i take it that none of us is going to buy bulk???

MySpree · Post by **MySpree** » Sat Feb 25, 2006 1:43 am

matt u and me will split the cost... wanna?

Rezachi1 · Post by **Rezachi1** » Wed Mar 01, 2006 1:18 pm

Everyone says don't use marine oil in the engine, but the royal purple that I seen recommended here is TCW-3. Isn't this marine oil? Also, what will happen if you run marine oil through the engine?

85spreeelite · Post by **85spreeelite** » Wed Mar 01, 2006 2:34 pm

Yup for the 2 stroke. He had 2 bottles on the shelf but I could only buy 1 that day, ive since gone back and got the other one. The guy said he can order more.

darat · Post by **darat** » Wed Mar 01, 2006 10:12 pm

marine oil is to thick and will clog up ur exhuast port to fast..

85spreeelite · Post by **85spreeelite** » Thu Mar 02, 2006 7:41 pm

Royal Purple 2-Cycle TCW III is recommended for use in both pre-mixed and oil injected gasoline two-cycle engines in outboard motors, motorcycles, jet skis, chain saws, etc.

darat · Post by **darat** » Thu Mar 02, 2006 8:16 pm

anyone got any input on this..

85stroka · Post by **85stroka** » Thu Mar 02, 2006 8:24 pm

I would only premix if anything, injector oil tends to be a little thicker, I know alot of us run klotz r50 and that's premix only ,but there's so many of you that hate premix!