Page 1 of 6

honda dio bore kit

Posted: Tue Feb 07, 2006 4:05 pm
by diomike
wat should i be getting out of my dio with a 70cc.
i still got a stock pipe

Posted: Tue Feb 07, 2006 10:01 pm
by bitteraspects
better bottom end and maybe 5mph on the top. but it all depends on a lot of other factors. tuning mostly.

Posted: Tue Feb 07, 2006 10:15 pm
by diomike
AROUND 67 OR 70 KM/H IT STARTS TO BOG.
IS IT MY CRAB SETTING OR CAN IT BE MY STOCK PIPE?

Posted: Tue Feb 07, 2006 10:49 pm
by bitteraspects
probably the carb, you can run a bigger bore with a stock pipe. did you change anything else besides the bore?

Posted: Tue Feb 07, 2006 10:58 pm
by bitteraspects
also is it broken in, if so, how many miles?
what kind of bore kit is it? who is it made by?

Posted: Wed Feb 08, 2006 12:28 am
by maddog
Thought it was 72cc ? just like gear ratios close enough!

Posted: Wed Feb 08, 2006 7:16 pm
by deathwish
one of the other things i added was a cone airfilter. i changed the jet to the one it came with the bore kit. mine is made by athena and is made in italy.

Posted: Wed Feb 08, 2006 7:17 pm
by deathwish
by the way its diomike at a friends house. :)

Posted: Wed Feb 08, 2006 8:22 pm
by bitteraspects
you wil have to rejet for the filter. that filter is allowing in too much air, so you need to changejets again.

Posted: Thu Feb 09, 2006 2:33 am
by hrnytrtlsgsxr
if you put back the airbox you can stay with the jet you have.

Posted: Thu Feb 09, 2006 9:13 pm
by diomike
i cant keep the same jet. i just tried. and it gets too much gas no enought air. i was thinking of puting the stock jet back on with the air box. i will see wat happens.

Posted: Thu Feb 09, 2006 9:25 pm
by maddog
Hey Mike, did you change the final drive gears, i would never run a stock carb with a bore kit, go with a polini corsa kit, cuz if can't break it it must work!!!

Posted: Fri Feb 17, 2006 12:10 am
by diomike
wat do u mean the final drive gears?

Posted: Fri Feb 17, 2006 12:22 am
by bitteraspects
the small set of gears in the motor. behind the trans

Posted: Fri Feb 17, 2006 12:23 am
by bitteraspects
and yes you can run a stock carb with a bore kit. you can even run a stock carb with a bore kit and an aftermarket pipe.