44mm bbk timing
Moderator: Moderator
Re: 44mm bbk timing
I hope so my engines only a single cylinder dumb *..
2001 Elite,50mm bbk, 44.1 mm mini stroker
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears
1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears
1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
Re: 44mm bbk timing
That engine is 6 single cylinder engines all tied together by a single crank, but each cylinder is individually tuned. But each cylinder is bigger than your warm sticks. But of course you are the dumb *.guen84 wrote:I hope so my engines only a single cylinder dumb *..
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 44mm bbk timing
Wow now your like the guy with the R1 who wanted to race me at the stop light. No comparison im building a scooter not a time machine...
2001 Elite,50mm bbk, 44.1 mm mini stroker
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears
1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears
1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
Re: 44mm bbk timing
You really are too stupid to get it. I was tuning 6 engines at once to get this monster to run. I also has a V-4 cylinder engine with 4X2 barrel diaphragm carbs on it. I have forgotten more about tuning than you are every likely to know. Never once said a thing about racing you or anyone.guen84 wrote:Wow now your like the guy with the R1 who wanted to race me at the stop light. No comparison im building a scooter not a time machine...
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 44mm bbk timing
No u dont get it stupid.. We r giving u a hard time just like u give everyone else. Why dont u help people instead of bash them.
2001 Elite,50mm bbk, 44.1 mm mini stroker
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears
1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
28mm oko carb, no restriction air filter, ct intake
zx clutch, polini for ruckus vari, pg long, 7.7 gears
1999 Elite 51mm bbk, oko vari, sef ramp plate, 8.44 gears
Re: 44mm bbk timing
You don't know enough or have enough experience to give me an easy time much less a hard time.guen84 wrote:No u dont get it stupid.. We r giving u a hard time just like u give everyone else. Why dont u help people instead of bash them.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 44mm bbk timing
Dude! I forgot more than you know! ....And my R\C Boat is faster than yours!
94 elite 50s
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears
Re: 44mm bbk timing
Mine doesn't even start to go until your top speed. Unless you are actually doing well over 100+ mph, don't talk to me about fast. My play/ski boat ran over 70 mph. My race boats were FAST!ZMUD wrote:Dude! I forgot more than you know! ....And my R\C Boat is faster than yours!
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: 44mm bbk timing
good luck bear these morons don't get it
Re: 44mm bbk timing
apparently you don't get it!!!! We asked about boost port timing and it turned into a s*** show!!!!! So go back to sucking bear off and onto the next thread!!fastplastic wrote:good luck bear these morons don't get it
94 elite 50s
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears
Re: 44mm bbk timing
You've got the cylinder, measure it you nitwit. To stupid to think for yourself.ZMUD wrote:apparently you don't get it!!!! We asked about boost port timing and it turned into a s*** show!!!!! So go back to sucking bear off and onto the next thread!!fastplastic wrote:good luck bear these morons don't get it
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 44mm bbk timing
No I was waiting for you to tell me everything you dont know about this and think you do!
94 elite 50s
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears
Re: 44mm bbk timing
Still too stupid to figure it out for yourself. But then we expected no less. There is really not much point in telling you anything. You wouldn't understand even if we dumbed it down to the 1st grade level you normally operate at.ZMUD wrote:No I was waiting for you to tell me everything you dont know about this and think you do!
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: 44mm bbk timing
you wanna know about port timing use the search button or make a thread about how two morons blew up a bore and wine about it... opps did i say that out loud
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: 44mm bbk timing
Bear is right. Next time look at the ports. Get a dremmel and knock the burs off if any. Then polish it. Not rocket science. I do this on all my kits. Takes like 5- 10 min.
Also I got the pics you sent me. The port looked a little rough but next time you get a kit you will know what to do. Remember dont WOT these things out of the box. The break in is the whole trick for longevity.
Taz
Also I got the pics you sent me. The port looked a little rough but next time you get a kit you will know what to do. Remember dont WOT these things out of the box. The break in is the whole trick for longevity.
Taz