fastplastic wrote:you wanna know about port timing use the search button or make a thread about how two morons blew up a bore and wine about it... opps did i say that out loud
Or maybe I'll start a thread about two morons that chimed in with NO VALUEABLE INPUT!
tazland001 wrote:Bear is right. Next time look at the ports. Get a dremmel and knock the burs off if any. Then polish it. Not rocket science. I do this on all my kits. Takes like 5- 10 min.
Also I got the pics you sent me. The port looked a little rough but next time you get a kit you will know what to do. Remember dont WOT these things out of the box. The break in is the whole trick for longevity.
Taz
The kit looked good you sent me. Thats the thing. I know all bout knocking burrs off that can cause a problem(not my first build). It was the cylinder that failed. And that was just on break in on the stand. I didn't even get to ride it!
ZMUD wrote:Or maybe I'll start a thread about two morons that chimed in with NO VALUEABLE INPUT!
The kit looked good you sent me. Thats the thing. I know all bout knocking burrs off that can cause a problem(not my first build). It was the cylinder that failed. And that was just on break in on the stand. I didn't even get to ride it!
How can there be valuable input to a BS question?
Your opinion and abilities are suspect at best at this point.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3 '85 Aero 80 '84 Aero 125 X 2
'84 Aero 125 '84 Aero 125 X 2 '85 Aero 50
'85 Spree
How many national speed records and National High point championships do you hold. How long have you made a live and a professional factory certified 2 stroke mechanic? Until you can make a claim to all three of those things, PUT A SOCK IN IT ROOKIE!/size]
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3 '85 Aero 80 '84 Aero 125 X 2
'84 Aero 125 '84 Aero 125 X 2 '85 Aero 50
'85 Spree
My dad has a National high points championship....
72cc polini contesa kit
oko variator with 8.5 gram malossi weights
21mm Black Oko Carb & Ct Manifold
8.44 gear
malossi MHR exhaust
Dio zx trans conversion
1000 center spring
1500 grabbers
sef ramp plate
B9hs plug
GPS 60mph
The kit looked good you sent me. Thats the thing. I know all bout knocking burrs off that can cause a problem(not my first build). It was the cylinder that failed. And that was just on break in on the stand. I didn't even get to ride it!
