HELP

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
User avatar
Vidra
BMX
BMX
Posts: 20
Joined: Sun Oct 23, 2011 3:52 pm
Location: Budapest
Contact:
Contact Vidra

HELP

Post by Vidra »

Hi all ruima cylinder crankshaft 50mm 44.1mm 24mm oko carburetor main jet 128 pilot 46, 33mm exhaust v8, a beautiful brown candles but do not go 45mph lehhet what's wrong.

Sorry for the translator understands this writing program I write I do not speak English.
Budapest, Hungary.
Thank you for your answers. Vidra
Honda dio AF-18E engine cylinder 50mm Ruima carburetor Dellorto PHBHB 28mm main200 exhaust 28mm v8 Crank 44.0mm Clutch Spring red Clutch Pad Springs white Primarygear Malossi16/32Secondargear Ruima17/42 Malossi KEVLAR Belt Pulley 8g Air Filter X2
Top
808BMW
Elite
Elite
Posts: 697
Joined: Thu Feb 05, 2009 12:45 am
Location: Kailua-Kona, HI

Re: HELP

Post by 808BMW »

sebess├®get v├íltani meghat├írozott ├ítviteli
gy├íri fogasker├®k k├®szlet t├║l lass├║


If that fails, try translate this: Change your transmission gears, if they are the factory gears, it is too slow.
In 2040 they say we're going away
We could never let them control
Hawaiian man, take back your hawaiian land
Top
User avatar
Vidra
BMX
BMX
Posts: 20
Joined: Sun Oct 23, 2011 3:52 pm
Location: Budapest
Contact:
Contact Vidra

Re: HELP

Post by Vidra »

Hi Malossi final drive ratios 16 * 32 secondary ruima 17 * 42
variable 6pcs 7.5g
Honda dio AF-18E engine cylinder 50mm Ruima carburetor Dellorto PHBHB 28mm main200 exhaust 28mm v8 Crank 44.0mm Clutch Spring red Clutch Pad Springs white Primarygear Malossi16/32Secondargear Ruima17/42 Malossi KEVLAR Belt Pulley 8g Air Filter X2
Top
808BMW
Elite
Elite
Posts: 697
Joined: Thu Feb 05, 2009 12:45 am
Location: Kailua-Kona, HI

Re: HELP

Post by 808BMW »

How many gears sets did you change?

If you bought 2, you need to change 1 back to factory. Use malossi gear + stock gear, or ruima + stock gear, but do not run malossi + ruima gear.
In 2040 they say we're going away
We could never let them control
Hawaiian man, take back your hawaiian land
Top
User avatar
Vidra
BMX
BMX
Posts: 20
Joined: Sun Oct 23, 2011 3:52 pm
Location: Budapest
Contact:
Contact Vidra

Re: HELP

Post by Vidra »

Thank you, this will be a problem.

Thank you István Vidra
Honda dio AF-18E engine cylinder 50mm Ruima carburetor Dellorto PHBHB 28mm main200 exhaust 28mm v8 Crank 44.0mm Clutch Spring red Clutch Pad Springs white Primarygear Malossi16/32Secondargear Ruima17/42 Malossi KEVLAR Belt Pulley 8g Air Filter X2
Top
User avatar
Vidra
BMX
BMX
Posts: 20
Joined: Sun Oct 23, 2011 3:52 pm
Location: Budapest
Contact:
Contact Vidra

Re: HELP

Post by Vidra »

Hi

cylinder: ruima 50mm
crankshaft: racing teflon 44.1mm
exhaust: SYM V8
carburetor: OKO 24mm main 112 pilot 46
vario: 8g
clutch: red,white
cdi: fox racing
end transmission: malossi 16*32
top speed: 53mp/h
but it is not enough what can I do to drive faster?
picture if you need to do.

please help.
Honda dio AF-18E engine cylinder 50mm Ruima carburetor Dellorto PHBHB 28mm main200 exhaust 28mm v8 Crank 44.0mm Clutch Spring red Clutch Pad Springs white Primarygear Malossi16/32Secondargear Ruima17/42 Malossi KEVLAR Belt Pulley 8g Air Filter X2
Top
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: HELP

Post by swimmingfree »

what is your rpm at 53mph ???
swimmingfree
Last edited by swimmingfree on Wed Oct 26, 2011 3:59 pm, edited 1 time in total.
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Top
User avatar
Vidra
BMX
BMX
Posts: 20
Joined: Sun Oct 23, 2011 3:52 pm
Location: Budapest
Contact:
Contact Vidra

Re: HELP

Post by Vidra »

Hi, unfortunately I do not know the wrong speed measurement devices.
Honda dio AF-18E engine cylinder 50mm Ruima carburetor Dellorto PHBHB 28mm main200 exhaust 28mm v8 Crank 44.0mm Clutch Spring red Clutch Pad Springs white Primarygear Malossi16/32Secondargear Ruima17/42 Malossi KEVLAR Belt Pulley 8g Air Filter X2
Top
User avatar
Vidra
BMX
BMX
Posts: 20
Joined: Sun Oct 23, 2011 3:52 pm
Location: Budapest
Contact:
Contact Vidra

Re: HELP

Post by Vidra »

Hi all I bike.but do not go more than 50mp/h have no idea what to do.


[img] http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg
http://kepfeltoltes.hu/view/111029/IMG0 ... es.hu_.jpg[/img]
Honda dio AF-18E engine cylinder 50mm Ruima carburetor Dellorto PHBHB 28mm main200 exhaust 28mm v8 Crank 44.0mm Clutch Spring red Clutch Pad Springs white Primarygear Malossi16/32Secondargear Ruima17/42 Malossi KEVLAR Belt Pulley 8g Air Filter X2
Top
User avatar
Vidra
BMX
BMX
Posts: 20
Joined: Sun Oct 23, 2011 3:52 pm
Location: Budapest
Contact:
Contact Vidra

Re: HELP

Post by Vidra »

Hi all The problem with the engine spinning 4500rpm no more than what could be the problem.
Honda dio AF-18E engine cylinder 50mm Ruima carburetor Dellorto PHBHB 28mm main200 exhaust 28mm v8 Crank 44.0mm Clutch Spring red Clutch Pad Springs white Primarygear Malossi16/32Secondargear Ruima17/42 Malossi KEVLAR Belt Pulley 8g Air Filter X2
Top
Post Reply

Return to “Performance Technical”