Page 1 of 1
HELP
Posted: Sun Oct 23, 2011 4:57 pm
by Vidra
Hi all ruima cylinder crankshaft 50mm 44.1mm 24mm oko carburetor main jet 128 pilot 46, 33mm exhaust v8, a beautiful brown candles but do not go 45mph lehhet what's wrong.
Sorry for the translator understands this writing program I write I do not speak English.
Budapest, Hungary.
Thank you for your answers. Vidra
Re: HELP
Posted: Sun Oct 23, 2011 5:19 pm
by 808BMW
sebess├®get v├íltani meghat├írozott ├ítviteli
gy├íri fogasker├®k k├®szlet t├║l lass├║
If that fails, try translate this: Change your transmission gears, if they are the factory gears, it is too slow.
Re: HELP
Posted: Sun Oct 23, 2011 5:39 pm
by Vidra
Hi Malossi final drive ratios 16 * 32 secondary ruima 17 * 42
variable 6pcs 7.5g
Re: HELP
Posted: Sun Oct 23, 2011 5:44 pm
by 808BMW
How many gears sets did you change?
If you bought 2, you need to change 1 back to factory. Use malossi gear + stock gear, or ruima + stock gear, but do not run malossi + ruima gear.
Re: HELP
Posted: Mon Oct 24, 2011 12:51 pm
by Vidra
Thank you, this will be a problem.
Thank you István Vidra
Re: HELP
Posted: Wed Oct 26, 2011 2:51 pm
by Vidra
Hi
cylinder: ruima 50mm
crankshaft: racing teflon 44.1mm
exhaust: SYM V8
carburetor: OKO 24mm main 112 pilot 46
vario: 8g
clutch: red,white
cdi: fox racing
end transmission: malossi 16*32
top speed: 53mp/h
but it is not enough what can I do to drive faster?
picture if you need to do.
please help.
Re: HELP
Posted: Wed Oct 26, 2011 3:14 pm
by swimmingfree
what is your rpm at 53mph ???
swimmingfree
Re: HELP
Posted: Wed Oct 26, 2011 3:46 pm
by Vidra
Hi, unfortunately I do not know the wrong speed measurement devices.
Re: HELP
Posted: Sat Oct 29, 2011 2:09 pm
by Vidra
Re: HELP
Posted: Sat Oct 29, 2011 5:27 pm
by Vidra
Hi all The problem with the engine spinning 4500rpm no more than what could be the problem.
