1985 Honda Spree help with tuning and performance
Moderator: Moderator
1985 Honda Spree help with tuning and performance
I bought this gem off an old man and it ran pretty slow. About 22 mph was all I could get out of it. With a new belt, air filter, plug and a little tuning i got 30 at a pretty steady pace. I drilled the top of the airbox but am not to sure if it made much of a difference. I just ordered a DIO High Performance CDI and COIL kit and am hoping this will help.
Any suggestions would be awesome.
Any suggestions would be awesome.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 1985 Honda Spree help with tuning and performance
I just ordered a DIO High Performance CDI and COIL kit and am hoping this will help.you have wasted the money you will gain nothing by this
Any suggestions would be awesome.do a pully mod use the search to find out how
swimmingfree
Any suggestions would be awesome.do a pully mod use the search to find out how
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 1985 Honda Spree help with tuning and performance
Thank you. Bad news though. Lol
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 1985 Honda Spree help with tuning and performance
this will do more then what you got commoing but you will lose 0 to 10 tork ,,,
swimmingfree
http://hondaspree.net/wiki/index.php5?t ... Pulley_Mod
othere thing you can do.. taller tire and get the dome piston i think your is a dish ..
swimmingfree
http://hondaspree.net/wiki/index.php5?t ... Pulley_Mod
othere thing you can do.. taller tire and get the dome piston i think your is a dish ..
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 1985 Honda Spree help with tuning and performance
you should patch the new hole. doesn't need any more air than the factory gave it. It will cause problemsInnovaKid wrote: I drilled the top of the airbox but am not to sure if it made much of a difference.
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
Re: 1985 Honda Spree help with tuning and performance
I now seem to be able to get a solid 31-32 mph after full warm up. Im still waiting for my delivery.
Re: 1985 Honda Spree help with tuning and performance
The 31 mph it on a very lean mixture which will eventually melt the piston. Your choice but don't whine when the engine dies.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 1985 Honda Spree help with tuning and performance
i would do a plug chop to be sure you arent running to lean. and also if your numbers are just coming from your speed they can be anywere betwenn 1-4mph off so i would test that with a gps.
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
-
- Spree
- Posts: 105
- Joined: Fri Sep 12, 2008 8:28 pm
- Location: Clinton Twp Michigan
- Contact:
Re: 1985 Honda Spree help with tuning and performance
I have a stock 1985 spree that only went 26, so i tried the dio High Performance cdi & coil off of ebay and it went thirty when the scooter was warmed up. also it took a couple weeks for them to get worn in. not a huge difference.
Have 4, 84-86 Sprees
Sprite-85 Honda spree
-87 elite 50 engine
-90 jet
-9 and 10 gram rollers
-Highly ported intake and exhaust
-custom performance muffler
3 original sprees. A red, black and white
Sprite-85 Honda spree
-87 elite 50 engine
-90 jet
-9 and 10 gram rollers
-Highly ported intake and exhaust
-custom performance muffler
3 original sprees. A red, black and white
Re: 1985 Honda Spree help with tuning and performance
I'm not buying the CDI and coil made any difference, mainly since none of the old pros have ever seen a improvement. If the stock stuff is good, all you did was install parts with a lower reliability factor.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: 1985 Honda Spree help with tuning and performance
Bear45-70 wrote:I'm not buying the CDI and coil made any difference, mainly since none of the old pros have ever seen a improvement. If the stock stuff is good, all you did was install parts with a lower reliability factor.
x2!
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts