Disc Conversion for Aero 50?

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
WeeMan
Spree
Spree
Posts: 143
Joined: Mon Apr 09, 2012 2:10 pm
Location: Wakefield England

Disc Conversion for Aero 50?

Post by WeeMan »

Is there a conversion available or has someone done one? Now I have upgraded my scoot the brakes are ok but a disc would be better?

Cheers

Danny
Kevinstonge
Elite
Elite
Posts: 411
Joined: Fri Jul 22, 2011 2:04 pm
Location: Maine

Re: Disc Conversion for Aero 50?

Post by Kevinstonge »

It can be done but with some work and a different fork. I believe Graphite9 on here was considering fabbing up a metro fork swap for the spree and aero that would come with disk, but you'd have to ditch the stock fender and be ready to spend some cash money!!!
User avatar
deuce217
CB900F
CB900F
Posts: 1212
Joined: Thu Jun 10, 2010 4:13 am

Re: Disc Conversion for Aero 50?

Post by deuce217 »

Traffic has a build thread on here where he welded a new fork to the original stem. The Elite and aero have similar if not the same front forks. Fabbing one using the original will be tough. I have began the process on one of my aeros (actually is now owned by my brother in law).
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
Post Reply