Spree clutch

bbrmotosports · Post by **bbrmotosports** » Tue Oct 15, 2013 9:46 pm

It's time for a clutch in the ole spree. Do you think think thie Dio clutch will fit?

http://www.ebay.com/itm/Honda-Elite-50- ... 4f&vxp=mtr

paulpauly7 · Post by **paulpauly7** » Tue Oct 15, 2013 9:54 pm

ive got both at home on the bench ill have a look when im home from work and report back

bbrmotosports · Post by **bbrmotosports** » Tue Oct 15, 2013 9:55 pm

Cool , thanks

martynkim · Post by **martynkim** » Tue Oct 15, 2013 11:00 pm

Uhhhh, no....

paulpauly7 · Post by **paulpauly7** » Wed Oct 16, 2013 4:16 am

i disagree if you use only the clutch (not the pully) and use the dio clutch bell and cut the side cover in half so the clutch is exposed then yes you can use the dio clutch

bbrmotosports · Post by **bbrmotosports** » Wed Oct 16, 2013 7:24 am

So I can use the clutch but not the bell?

paulpauly7 · Post by **paulpauly7** » Wed Oct 16, 2013 1:17 pm

you need the dio clutch and dio bell

martynkim · Post by **martynkim** » Wed Oct 16, 2013 1:31 pm

Ok chop up a case.

deuce217 · Post by **deuce217** » Wed Oct 16, 2013 1:50 pm

martynkim wrote:Ok chop up a case.

It may be worth cutting one up. WIth a AF16 clutch he would have more options for grabber springs. The spree could really use a higher stall conversion. I will have to look at the spree case I have VS. the dio bell. as long as the bell is not taller than the case he could dremel or bore the case to just allow for the bell to clear. Like Trafficjamz did on the AF16 he sold me and I copied it on my other case. Great for keeping the clutch cool.

paulpauly7 · Post by **paulpauly7** » Wed Oct 16, 2013 2:15 pm

its just a side cover .if it isnt a kick start model then theres plenty of covers lyeing around in peoples back yards

bbrmotosports · Post by **bbrmotosports** » Wed Oct 16, 2013 9:44 pm

Later engagement "stall speed" is what I really need. I did order a set of 3-7000 RPM malossi springs for a zuma that will fit perfectly. So i'm hoping that will get me in the RPM range I want. I need new clutch shoes and ran into that one on sleezbay so I figured I would ask.
I wish I would have just went with the Dio set up before I went balls deep into this spree.

Trafficjamz · Post by **Trafficjamz** » Thu Oct 17, 2013 5:34 pm

http://www.hondaspree.net/phpBB3/viewto ... =8&t=14539

I did this mod back in 2010

Things You need to do for this mod
1. find a GY6 clone, dio, or elite s Clutch and bell.
2. Get some 2k or 3k dio grab springs (depending on how you like to take off) and install them.
3. Do the "spree pulley mod" (Shave down the front pulley boss so the belt rides higher in the front pulley.
4. Take apart the spree clutch/rear pulley.
5. shorten the spree spring by 1/3 (to ease the stress on the belt)
6. attach dio clutch to spree rear pulley with shortened spring in between
7. mod your spree cover so it fits back on (The dio clutch is Big)

bbrmotosports · Post by **bbrmotosports** » Thu Oct 17, 2013 7:31 pm

Do the GY6 engines fit right in the spree? I see a bunch on ebay cheap

paulpauly7 · Post by **paulpauly7** » Thu Oct 17, 2013 9:45 pm

the gy6 is the chinese dio

Honda Spree and Elite 50 Forums

Spree clutch

Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch

Re: Spree clutch