Af16 bbk 50mm

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Af16 bbk 50mm

Post by MrJumps »

Im planning on getting tazlands bbk for my af16 thats comming in. What does everyone use for a pipe?? I actually want a louder pipe but I want the best performance out of it. Any sujestions?
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Af16 bbk 50mm

Post by MrJumps »

I had a change of plans I wanna practice tuning and riding on the taiwan bore then once ive killed that motor or get board with it switch over to the corsa and stroker crank. Im gonna get there eventually. Maybe one day I might be brave enough to get a welder and go more extteme and watercool a 125.
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Af16 bbk 50mm

Post by MrJumps »

I know, bones is getting my tottom end with the crank ready any tips for the top end? Also if im going to be building a whole trans setup where should I start for hill climbing and 55mph highway riding??
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Af16 bbk 50mm

Post by MrJumps »

Im going with the pg long, im gonna need a variator, clutch and drive pully what should I start off with? I wanna do the zx mod.
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Af16 bbk 50mm

Post by MrJumps »

graphite9 wrote:Polini vari, and clutch depends on budget. You can do a cheaper malossi fly/bell kit, or a better polini/evo setup. Just depends on your goals. Fly will work with taiwan setup, but if you go to a corsa, or MHR cylinder you will want a better clutch
I think im gonna do the malossi kit on the variator and a clutch. Any where I can get just the pully? I cant find a non china branded one.
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Af16 bbk 50mm

Post by MrJumps »

graphite9 wrote:Do you mean front pulley or rear?
Rear as in drive pully I guess the pully the clutch is on or if their is a whole kit that is pully,clutch,and bell that would be plendid
User avatar
tazland001
Board Supporter
Board Supporter
Posts: 1333
Joined: Thu Apr 30, 2009 11:46 pm

Re: Af16 bbk 50mm

Post by tazland001 »

I would get a gear set. Gears are 70% of the upgrade.

Taz
MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Af16 bbk 50mm

Post by MrJumps »

MrJumps
CB900F
CB900F
Posts: 1453
Joined: Thu Dec 25, 2014 11:12 pm
Location: Tennessee, Maryville

Re: Af16 bbk 50mm

Post by MrJumps »

I am also gonna start with a stock vari and stock clutch. Any advice for spring stiffness and weights??

Would you sujest a keli variator as a good start?
User avatar
Downsouthdio
CB900F
CB900F
Posts: 1205
Joined: Wed Dec 21, 2011 11:00 am
Location: Key west

Re: Af16 bbk 50mm

Post by Downsouthdio »

Ive always loved my keli,from stock all the way modded it always did me great ,And its a nice improvement on a stock bike
Honda super dio
Corsa
26mm
Sparrow
Post Reply