My bike has major jetting problems I believe
When I make the bike more rich when turning the screw the bike tends to shoot a lot of smoke out of the exhaust and barely moves then after a bit after the smoke is done shooting out of the exhaust it starts to ride normal but dies out later during the ride maybe about a minute in to riding
When I make the bike more lean when turning the screw out the bike starts out fine but also dies out very fast
The jets I'm runing are 90 main and 38 pilot this is on a stock SYM carberuter
Any idea what the problem is ?
Jetting problems
Moderator: Moderator
Jetting problems
Honda Elite SR 1996 AF16e Polini Contessa Ported 28oko Arrow pipe
Honda Aero 50 1987 AF05 Malossi Big Bore Kit 14 Kehin Oem Honda Pipe
Honda Aero 50 1987 AF05 Malossi Big Bore Kit 14 Kehin Oem Honda Pipe
-
- Elite
- Posts: 392
- Joined: Mon Feb 01, 2016 11:04 pm
- Location: beaverton, or
Re: Jetting problems
Plug could be going out.
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: Jetting problems
Are you running a free flow filter?