Spree bbk issues.

[stevespree7]

HOW DO I GET NE PISTON RINGS FOR THIS KIT? I DESPERATELY NEED!!! I'D EVEN GET A NEW PISTON AND RING KIT. I HAVE 3 JUGS. 2 GOOD PISTONS ... ONE SET OF RINGS. I'VE GOTTEN 3K... BUT GET A BIG CARB AND ADAPTER/INTAKE

[eclark5483]

PM Taz, I'm sure he can help.

[stevespree7]

I've run this kit up to 385 no problem. Just don't go over 400 or dead baby..

If you don't have a bigger intake yet do it. If you look into the math, the intake of the spree is waaaay too small for that size kit.

[stevespree7]

Yes eclark. That is what I meant. Lol hope you get it fixed!

[MrJumps]

I've run this kit up to 385 no problem. Just don't go over 400 or dead baby..

If you don't have a bigger intake yet do it. If you look into the math, the intake of the spree is waaaay too small for that size kit.

350*F max those bores are cast iron, but the pistons are aluminium. Your gonna melt at about 360*f at 400*f your gonna have a rod push its way through the soft piston.

[stevespree7]

Dang... well I lucky ... wow. Hahah up jet time!

[Meatball]

My Taiwan bore locked up at 380-ish

[MrJumps]

Yeah 380 is when I had a soft seize too. As for the race bores out of Italian areas they can withstand a major amount of blunt trama.