Intake Gasket Question
Moderator: Moderator
- R1Titan911
- Elite
- Posts: 356
- Joined: Wed Aug 17, 2016 4:11 pm
- Location: FloGrown
Intake Gasket Question
I assume I can use stock intake gaskets for my Naraku? SSS is sold out, thinking of just getting some off bikebandit. Unless any of you have a source for a better quality one?
87' Spree: "Victoria's Spreecret"
78' Express:
78' Express:
Re: Intake Gasket Question
Do you mean for the base only? The Naraku has 3 gasketsR1Titan911 wrote:I assume I can use stock intake gaskets for my Naraku? SSS is sold out, thinking of just getting some off bikebandit. Unless any of you have a source for a better quality one?
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
- R1Titan911
- Elite
- Posts: 356
- Joined: Wed Aug 17, 2016 4:11 pm
- Location: FloGrown
Re: Intake Gasket Question
Sorry yes the base. Can i use stock?
But if i needed replacement gaskets for the Naraku reed cage where can i source those?
But if i needed replacement gaskets for the Naraku reed cage where can i source those?
87' Spree: "Victoria's Spreecret"
78' Express:
78' Express:
Re: Intake Gasket Question
You can look at http://www.treatland.tv/vforce-replacem ... t-g364.htm or from http://store.mototassinari.com/index.php/gaskets.htmlR1Titan911 wrote:Sorry yes the base. Can i use stock?
But if i needed replacement gaskets for the Naraku reed cage where can i source those?
For the base I would say there is a good chance but as always, double check for air leaks!
On the Naraku cage, I am not 100% sure these will fit exactly but the vforce reed cage fits a ct manifold so you might get lucky here.
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
- R1Titan911
- Elite
- Posts: 356
- Joined: Wed Aug 17, 2016 4:11 pm
- Location: FloGrown
Re: Intake Gasket Question
I'm not saying i'm going to re-use the intake gasket. I just wanted to know if fitment of the stock one works so i can just buy a new stock one. Then find ones for the cage if needed. Thanks Bones!
87' Spree: "Victoria's Spreecret"
78' Express:
78' Express: