125cc Stroker 28mm OKO Baseline

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3546
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

125cc Stroker 28mm OKO Baseline

Post by burnt_toast » Thu Nov 02, 2017 4:12 pm

Looking for baseline jetting suggestions for a 125cc stroker and 28mm OKO carb combo. Been searching old posts and find mostly results for 30 and 32mm carbs.

Will be running 93oct and 32:1 premix with Castor927, 650' above sea level.

Trying to set it up for drag racing this weekend and strapped for time, any input is appreciated!!
too many scoots, not enough time :nervous:
come on 2020! lets turn it around :woot:

User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3546
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Re: 125cc Stroker 28mm OKO Baseline

Post by burnt_toast » Fri Nov 03, 2017 9:10 am

scratch that. china sent me wrong carb.. 26mm PWK instead of 28mm OKO :x

tryin to make it work..
too many scoots, not enough time :nervous:
come on 2020! lets turn it around :woot:

User avatar
benji
CB900F
CB900F
Posts: 1709
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: 125cc Stroker 28mm OKO Baseline

Post by benji » Mon Nov 13, 2017 11:48 am

Post pics. If it's a clone don't bother man, more headache than it's worth imo.

Post Reply