Not getting all the way on pipe

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Revolutionary
Spree
Spree
Posts: 101
Joined: Sat Jan 25, 2014 6:25 pm
Location: Colleyville, TX

Re: Not getting all the way on pipe

Post by Revolutionary »

I have almost identical setup now, just installed Corsa jug, Malossi crank, Arrow pipe and running OKO 24mm carb. I had trouble getting on the pipe with 125 main. Tried 135 and it was just as bad. Dropped in a 110 and it came to life. Neighbors not happy I'm running without a muffler but this this is quick and loud! Still breaking in so no full throttle yet, even half throttle it is 10,500 before dropping down (5.6g rollers). Feels super solid.
User avatar
nateberrier
Spree
Spree
Posts: 164
Joined: Wed Jul 10, 2019 2:01 pm
Location: Louisville

Re: Not getting all the way on pipe

Post by nateberrier »

I was too fat on the main jet, it goes like * with a 108 in it. Only wants to hang at 10500 but it's firmly on it. Also did zx trans
1986 Aero White -- Stock With Keli Var
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
Post Reply