87 electrical issues....

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
User avatar
chevyguyjay
CB900F
CB900F
Posts: 1169
Joined: Sat Feb 03, 2007 5:09 pm
Location: Lincoln Park, MI.
Contact:
Contact chevyguyjay

87 electrical issues....

Post by chevyguyjay »

well im tring to get my blinkers to work, and aint havin any luck. i took the head light/ speedo housing apart. :( the only wires i can find that aint hooked up to anything is a clip that has 3 wires. black, gray, green. i found a spare blinker clicker and it has 3 wires. orange, blue, green. i know i need the clicker hooked up in order for them to blink. any ideas on what to try? :? cant be that difficult..............well except for me. :lol:
Top
User avatar
noiseguy
Site Admin
Site Admin
Posts: 4429
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:
Contact noiseguy

Post by noiseguy »

A standard $3 clicker from Murrays will work.

Usually problems come from dead bulbs.
Admin, Hondaspree.net

Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Top
PimpinSpree
Elite
Elite
Posts: 722
Joined: Thu Apr 19, 2007 6:40 pm
Location: oregon coast

Post by PimpinSpree »

did you try replacing all the bulbs first, usually whats wrong
Top
User avatar
chevyguyjay
CB900F
CB900F
Posts: 1169
Joined: Sat Feb 03, 2007 5:09 pm
Location: Lincoln Park, MI.
Contact:
Contact chevyguyjay

Post by chevyguyjay »

all bulbs are fine. blinkers dont work?? :? the wires are hooked up from the handle bar switch. i have a blinker clicker. i dont know where it hooks up to? there is a black clip with 3 wires. black, gray, green that isnt hooked up to anything. i need to know what this clip is for. its a 87 wiring harness. it is located under the speedometer by the handlebars. any ideas would help.
Top
User avatar
hemlockz
Goped
Goped
Posts: 77
Joined: Mon Oct 09, 2006 10:04 am
Location: Portland, OR

Post by hemlockz »

under the speedo cover there is a plastic ring that holds a thermal flasher. It looks like a 2" canister with a metal ring around the top. The bottom side of that canister is where the 3 wire plug connects to. Someone could have salvaged yours because they are like $70 new from Honda. If you have an empty plastic ring under your speedo that looks like a small cup holder then you're missing your clicker.
Top
User avatar
chevyguyjay
CB900F
CB900F
Posts: 1169
Joined: Sat Feb 03, 2007 5:09 pm
Location: Lincoln Park, MI.
Contact:
Contact chevyguyjay

Post by chevyguyjay »

sweet!!! 8) could i splice in a clicker that has the orange/ blue/ green wires in to the black clip?? :? if so.....what colors? the black clip has black/green/and gray. thanks for you help!!! :D
Top
User avatar
chevyguyjay
CB900F
CB900F
Posts: 1169
Joined: Sat Feb 03, 2007 5:09 pm
Location: Lincoln Park, MI.
Contact:
Contact chevyguyjay

Post by chevyguyjay »

a..aa.....anyone........ :roll:
Top
gingerbreadman
BMX
BMX
Posts: 29
Joined: Sat Apr 28, 2007 9:03 pm
Location: OAHU

Post by gingerbreadman »

harness is fried.........
catch me if you can (",)
Top
User avatar
chevyguyjay
CB900F
CB900F
Posts: 1169
Joined: Sat Feb 03, 2007 5:09 pm
Location: Lincoln Park, MI.
Contact:
Contact chevyguyjay

Post by chevyguyjay »

can anyone tell me by splicing in the 86 blinker clicker to the 87 wiring harness black clip if the blinkers will work at all? :?
Top
Post Reply

Return to “Performance Technical”