af16 build jetting question

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
rag
Goped
Goped
Posts: 87
Joined: Sat Aug 20, 2011 1:19 pm
Location: north carolina

af16 build jetting question

Post by rag »

recent af16 build , heres whats done and have sum jetting questions on a good starting point - 85cc mini stroker kit, zx trans, 24mm polini pwk and uni air filter with arrow exhaust, what would be a good starting point on carb jetting?
ntonar
Spree
Spree
Posts: 146
Joined: Wed May 24, 2017 9:28 pm
Location: West Michigan

Re: af16 build jetting question

Post by ntonar »

I would guess 112-116 main and 45 slow. That is what I ran on my mini stroker.
rag
Goped
Goped
Posts: 87
Joined: Sat Aug 20, 2011 1:19 pm
Location: north carolina

Re: af16 build jetting question

Post by rag »

and what needle position was you at with that combination
Post Reply