Gearing Ratio for Honda Dio SK50MY (AF27)
Posted: Fri May 26, 2023 5:49 pm
Hey there, to the group. Need some assistance.
I recently did a Big Bore kit to my Honda Dio AF27 before doing my research, and now I realize I need to redo the Gearing Ratio to get my power. It went from a 50cc to a 72cc Melossi Big Bore. Surfing online I haven't gotten a straight answer, I read I should go between 16x42 or 16x36, some say 17x41, haven't came up conclusive. So figured I'd ask the community. I'm trying to get the most speed while still having fast acceleration. I read about lifters being swapped as well to improve acceleration but that came unconclusive.
Essentially what I'm trying to figure out is what should I do to the Transfer Case/Transmission to get best speed for acceleration without breaking the bank wide open. I'm open to all ideas because I don't know a ton about scooter modding minus the basics. Thanks in advance!
I recently did a Big Bore kit to my Honda Dio AF27 before doing my research, and now I realize I need to redo the Gearing Ratio to get my power. It went from a 50cc to a 72cc Melossi Big Bore. Surfing online I haven't gotten a straight answer, I read I should go between 16x42 or 16x36, some say 17x41, haven't came up conclusive. So figured I'd ask the community. I'm trying to get the most speed while still having fast acceleration. I read about lifters being swapped as well to improve acceleration but that came unconclusive.
Essentially what I'm trying to figure out is what should I do to the Transfer Case/Transmission to get best speed for acceleration without breaking the bank wide open. I'm open to all ideas because I don't know a ton about scooter modding minus the basics. Thanks in advance!