1987 se50 elite mlm pipe.

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
Volvo850R
Goped
Goped
Posts: 81
Joined: Wed Mar 07, 2018 4:42 pm
Location: New hampshire

1987 se50 elite mlm pipe.

Post by Volvo850R »

Hey guys
I put on the mlm pipe as well as 1500rpn springs and contra. Also up jet to an 86(might up again to 88)…I don’t have a scale so wondering what stock weight is for rollers so I know where to start with variator tuning. Or what size gram anyone suggests.? Thanks
1984 elite ch125
1985 spree nq50
1986 spree nq50
1987 helix cn250
User avatar
Meatball
CB900F
CB900F
Posts: 2323
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: 1987 se50 elite mlm pipe.

Post by Meatball »

If I remember right, the stock rollers are like 12g or something crazy. Been a minute since I weighed them. Its a sound investment to buy a cheap digital meth scale on Ebay. I think mine was less than $20.

Keep in mind that you can mix-n-match different weights in the vari as long as they are evenly balanced. Example: using three 7g and three 9g. Placed in the vari 7,9,7,9,7,9.
I need to find some new haters...the ones I have are starting to like me.
Volvo850R
Goped
Goped
Posts: 81
Joined: Wed Mar 07, 2018 4:42 pm
Location: New hampshire

Re: 1987 se50 elite mlm pipe.

Post by Volvo850R »

I will get a scale eventually . I tossed in three 6s and three 8s to get seven and still bogs. Maybe smaller needed
1984 elite ch125
1985 spree nq50
1986 spree nq50
1987 helix cn250
User avatar
Meatball
CB900F
CB900F
Posts: 2323
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: 1987 se50 elite mlm pipe.

Post by Meatball »

Dont look at it as having seven…its 42g total. Getting the Malossi yellow contra would improve the shift curve as well. That stock spring is well worn by now and isnt doing you any favors.
I need to find some new haters...the ones I have are starting to like me.
Post Reply