Buildup of 1990 Elite 50

Post by **noiseguy** » Mon Aug 15, 2005 1:34 pm

In case you haven't seen this site:

http://www3.telus.net/dougsimpson/Elite_1.html

This guy built up a '90 Elite 50, using a non-standard piston and overbore of the stock jug. Good reading.

MYSTERE1 · Post by **MYSTERE1** » Tue Aug 16, 2005 12:38 am

that piston might work for the spree as well. do the 87 - 92 elite have the same bore and stroke as the spree? I know the wrist pin is the same (10mm).

Any ways, you would need to find a 45mm piston to make the spree a 60cc

Post by **noiseguy** » Tue Aug 16, 2005 9:45 am

I believe that they do, but not absolutely sure. The Spree and '85-87 Aero have the same bore/stroke.