mopeds(not) you ride (pics please)
Moderator: Moderator
- JohnRobHolmes
- Goped
- Posts: 74
- Joined: Tue Jul 07, 2009 1:46 pm
Re: mopeds you ride (pics please)
Thanks for the questions!
The motor just coasts if I push it with the gas engine, unless I turn on the electric brake. Then it can regen into the battery, but it is quite expensive electricity VS the outlet!
The tank is from some old Bridgestone 90 bike. Ebay score that looked right.
The ehub on front is made by 9continent. The next hub will be a lighter geared unit called the Puma that will be all around better. Lighter, more torque, better efficiency during acceleration, etc.. I lace up wheels as part of my living so I get to see and experiment with all kinds of electric hubs.
The electric tops out at 42 on a downhill, about 35 on the flat. The gas tops out 36 on a downhill, about 32 on the flat. New carb is now installed but not tuned yet. It is acting like a lean bog but when I pull out the plug it is wet and black fouled. I'm still learning this two stroke tuning, the electrics and four strokes are so much more straightforwards!
The motor just coasts if I push it with the gas engine, unless I turn on the electric brake. Then it can regen into the battery, but it is quite expensive electricity VS the outlet!
The tank is from some old Bridgestone 90 bike. Ebay score that looked right.
The ehub on front is made by 9continent. The next hub will be a lighter geared unit called the Puma that will be all around better. Lighter, more torque, better efficiency during acceleration, etc.. I lace up wheels as part of my living so I get to see and experiment with all kinds of electric hubs.
The electric tops out at 42 on a downhill, about 35 on the flat. The gas tops out 36 on a downhill, about 32 on the flat. New carb is now installed but not tuned yet. It is acting like a lean bog but when I pull out the plug it is wet and black fouled. I'm still learning this two stroke tuning, the electrics and four strokes are so much more straightforwards!
- OneBulletDan
- Elite
- Posts: 343
- Joined: Wed Sep 28, 2011 12:40 pm
- Location: The Great State of Michigan
Re: mopeds you ride (pics please)
The family`s daily rides.
Should have a couple of Elites and a Spree to play show and tell with by spring.We can learn much from wise words, and less from wise guys.
- SpreeMadness520
- Elite
- Posts: 773
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: mopeds you ride (pics please)
1965 Vespa ![thumbwink :thumbwink:](./images/smilies/icon_thumbup.gif)
![thumbwink :thumbwink:](./images/smilies/icon_thumbup.gif)
- Attachments
-
- Vespa.jpg (244.15 KiB) Viewed 16795 times
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
Re: mopeds you ride (pics please)
*
- Attachments
-
- DSC01046.JPG (164.47 KiB) Viewed 16782 times
-
- Walter 006.JPG (169.45 KiB) Viewed 16782 times
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
- Dio89Elite
- Elite
- Posts: 701
- Joined: Wed Feb 01, 2012 3:55 pm
- Location: 50th state
Re: mopeds you ride (pics please)
^--wow.
that is one super clean Elite!
**
on another note:
I'll dress up my 89 E with the custom painted panels when I get my new helmet and post it up soon. =)
Expected delivery date of my new noggin protector is supposed to be this Friday... two more days...![naughtydance :ndance:](./images/smilies/naughtydance.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
**
on another note:
I'll dress up my 89 E with the custom painted panels when I get my new helmet and post it up soon. =)
Expected delivery date of my new noggin protector is supposed to be this Friday... two more days...
![naughtydance :ndance:](./images/smilies/naughtydance.gif)
-
- BMX
- Posts: 31
- Joined: Mon Jun 04, 2012 1:29 am
- Location: Ashland Ky
Re: mopeds you ride (pics please)
My 1999 Elite SA50 SR Origanlly Purple, but one of the previous owners repainted it red.
- Attachments
-
- AMYPED.png (203.3 KiB) Viewed 16696 times
My ride
'99 Honda Elite SR SA50
Re: mopeds you ride (pics please)
Here is my daily, a 2011 Yamaha C3 i picked up new in february. 4 stroke liquid cooled. Its a lot of fun!
![Image](http://i1263.photobucket.com/albums/ii628/laplantebd/2012-04-26_19-49-57_356.jpg)
![Image](http://i1263.photobucket.com/albums/ii628/laplantebd/2012-04-26_19-49-10_660.jpg)
![Image](http://i1263.photobucket.com/albums/ii628/laplantebd/2012-04-26_19-49-57_356.jpg)
![Image](http://i1263.photobucket.com/albums/ii628/laplantebd/2012-04-26_19-49-10_660.jpg)
1985 Spree AF16: viewtopic.php?f=20&t=31053
2001 Elite Daily: viewtopic.php?f=16&t=31397&p=272223#p272223
2001 Elite Daily: viewtopic.php?f=16&t=31397&p=272223#p272223
- SuprasNsprees
- Elite
- Posts: 564
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: mopeds you ride (pics please)
My new project. 1980 Magnum MKII. Low miles and leaking nearly every fluid from everywhere
Haven't even washed the bird poo off
![Image](http://i15.photobucket.com/albums/a372/maz4130/0b26a3cb.jpg)
![Image](http://i15.photobucket.com/albums/a372/maz4130/61e4919a.jpg)
End result will be something like this
![Image](http://i15.photobucket.com/albums/a372/maz4130/38fcf253.jpg)
Haven't even washed the bird poo off
![Image](http://i15.photobucket.com/albums/a372/maz4130/0b26a3cb.jpg)
![Image](http://i15.photobucket.com/albums/a372/maz4130/61e4919a.jpg)
End result will be something like this
![Image](http://i15.photobucket.com/albums/a372/maz4130/38fcf253.jpg)
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
- stucinthe80z
- Spree
- Posts: 124
- Joined: Tue Jun 12, 2012 7:04 am
- Location: PNW
Re: mopeds you ride (pics please)
1986 spree this is my 1986 spree added the trunk this weekend
- Attachments
-
- scooter pics 001.JPG (154.04 KiB) Viewed 16542 times
-
- spree1.jpg (8.93 KiB) Viewed 16629 times
Last edited by stucinthe80z on Mon Sep 10, 2012 1:03 am, edited 1 time in total.
- Petrock's 1984 Spree
- Elite
- Posts: 768
- Joined: Wed Dec 01, 2010 10:20 pm
- Location: Iowa
Re: mopeds you ride (pics please)
Here was the Spree I built up before my back shut down the whole riding it part.
![Image](http://farm3.staticflickr.com/2177/5784048278_335a8b2b86.jpg)
P1010975 by jpetrak, on Flickr
![Image](http://farm3.staticflickr.com/2533/5784048676_6c6dcbf4f3.jpg)
P1010976 by jpetrak, on Flickr
I did get around to fitting the side panels back on and I loved the way it sounded before I prepped it for winter storage where it remains
http://www.flickr.com/photos/58369736@N ... otostream/
Great looking rides guys!!
![Image](http://farm3.staticflickr.com/2177/5784048278_335a8b2b86.jpg)
P1010975 by jpetrak, on Flickr
![Image](http://farm3.staticflickr.com/2533/5784048676_6c6dcbf4f3.jpg)
P1010976 by jpetrak, on Flickr
I did get around to fitting the side panels back on and I loved the way it sounded before I prepped it for winter storage where it remains
http://www.flickr.com/photos/58369736@N ... otostream/
Great looking rides guys!!
Complete NOOB, sorry dudes
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
- stucinthe80z
- Spree
- Posts: 124
- Joined: Tue Jun 12, 2012 7:04 am
- Location: PNW
Re: mopeds you ride (pics please)
i have had this for one week now
- Attachments
-
- scooter pics 006.JPG (144.76 KiB) Viewed 16535 times
-
- scooter pics 001.JPG (154.04 KiB) Viewed 16535 times
- SuprasNsprees
- Elite
- Posts: 564
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: mopeds you ride (pics please)
![Image](http://i15.photobucket.com/albums/a372/maz4130/214FB836-FCD2-4239-82B2-58935206A8D2-4974-00000169E1D93C08.jpg)
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
- stucinthe80z
- Spree
- Posts: 124
- Joined: Tue Jun 12, 2012 7:04 am
- Location: PNW
Re: mopeds you ride (pics please)
this is my 87 se50 and m86 spree
- Attachments
-
- scooter pics 002.JPG (155.72 KiB) Viewed 16501 times
- JAKE DA SNAKE
- Noob
- Posts: 5
- Joined: Sun Dec 16, 2012 5:01 pm
- Location: HONALO HAWAII