Expansion chamber / tuned exhaust design program

This is the repository for hop-ups and mods for Elite and Spree. Look here for information on exhausts, porting, cylinders, intakes, and suspension mods.

Moderator: FAQ Moderator

Locked
User avatar
noiseguy
Site Admin
Site Admin
Posts: 4419
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:

Expansion chamber / tuned exhaust design program

Post by noiseguy »

All,

Here's a site you can use to design your own tuned pipe. It's in German, but the pipe design part is in English:

http://www.kreidler-verein.de/reso.html

I used this to design a pipe, it ended up being slightly larger than my original design, but overall pretty similar. It can also be used to reverse-engineer existing pipes for use on Spree et al.

FYI: On the Spree, the exhaust port angle is 140 deg, transfer port 104 deg, exhaust port area is 225 mm^2. Use exhaust temp of 600K. The Spree tops out around 8000 RPM at just under 30 MPH, so you can either use that as the RPM or go higher/lower.
Admin, Hondaspree.net

Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Locked