How to speed up a SE50 and SE50P Elite And AREOS 50

This is the repository for hop-ups and mods for Elite and Spree. Look here for information on exhausts, porting, cylinders, intakes, and suspension mods.

Moderator: FAQ Moderator

Locked
User avatar
darat
Veteran OG
Veteran OG
Posts: 3133
Joined: Fri Jul 23, 2004 10:24 am
Location: Fraser Michigan
Contact:

How to speed up a SE50 and SE50P Elite And AREOS 50

Post by darat »

The stock variator, The variator is located behind kickstart housing on the crankshaft has a plate held in place by 3, 7mm screws on the back that limits how high the trans. will shift up to limiting its speed. remove the pulley by using an impact gun and remove this plate from the back of the variator.. reinstall variator, and u will have gained *(5mph.)* If you really want to get the most out of it get a high speed pulley kit for it and change your roller weights to 8.5G you will have alot more take off and about 15mph more top end. Go to www.vtcycles.com and they can help you they have 3 different kits for the SE50. It is that ez.
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC
Locked