MSD blaster coil for Spree / Elite

deathwish · Post by **deathwish** » Wed Nov 09, 2005 7:32 pm

o well i have done almost everything i can do to my 84 spree it hits aroun36-38 on flat ground i would like to get it over 40... so i was think on get the msd blaster coil.... has anyone put this on a spree or will it even work for the spree???? also were would i be able to get it???

maddog · Post by **maddog** » Wed Nov 09, 2005 8:21 pm

It should work on the spree, my italjet has an intragraded cdi/coil unit so it will work, i also run oversized tires on my aero & elite but i don't know if you can do it on a spree, depends on the bead.

Post by **noiseguy** » Wed Nov 09, 2005 10:29 pm

It will work on a Spree, pretty much a direct replacement for the stock coil, you can even use the stock plug cap. Diosoljah had posts showing a hookup, before he went through and deleted every single thing he'd ever written...8O never could figure out what exactly happened there. He had his in place of the (removed) oil tank.

deathwish · Post by **deathwish** » Wed Nov 09, 2005 10:48 pm

alrite im gonna look into some more but i think it sounds pretty good

vette76 · Post by **vette76** » Wed Nov 09, 2005 11:14 pm

noiseguy wrote:It will work on a Spree, pretty much a direct replacement for the stock coil, you can even use the stock plug cap. Diosoljah had posts showing a hookup, before he went through and deleted every single thing he'd ever written...8O never could figure out what exactly happened there. He had his in place of the (removed) oil tank.

i believe what happened is, he removed all his pics because of the reciant scoot thefts down there. he did not want anyone to trace the connection through the image host. i believe that happened on another site.

maddog · Post by **maddog** » Wed Nov 09, 2005 11:30 pm

Well you boyz are up all night trying to find out the secrets on how to get h.p. from a stock honda spree, well you cam't

darat · Post by **darat** » Wed Nov 09, 2005 11:32 pm

lol if u have the tools and the knowlage u can do anything u want.

deathwish · Post by **deathwish** » Fri Nov 11, 2005 7:12 pm

well i looked around a couple stores and it seems i cannot get the msd blaster coil from any canadian dealers.......any one know a source for these?????

vette76 · Post by **vette76** » Fri Nov 11, 2005 7:31 pm

jegs, summit, ebay....exc.

diosoljah · Post by **diosoljah** » Thu Nov 17, 2005 1:20 am

Okay here it is again...Tip ( just dont let the coil and the wire touch the bare frame) Ive used a cutting of a bicycle tire tube at the base of the coil.

MySpree · Post by **MySpree** » Thu Nov 17, 2005 1:53 pm

whered ur oil tank go?

Post by **noiseguy** » Thu Nov 17, 2005 5:42 pm

He's running premix, I'm sure, since the stock oiler won't be able to keep up with the increased bore/stroke combo.

diosoljah · Post by **diosoljah** » Fri Nov 18, 2005 1:56 am

noiseguy wrote:He's running premix, I'm sure, since the stock oiler won't be able to keep up with the increased bore/stroke combo.

yup hes got that right!

maddog · Post by **maddog** » Fri Nov 18, 2005 6:52 pm

You can run the oil pump up to 76cc, after that its pre mix only.

darat · Post by **darat** » Mon Nov 21, 2005 9:43 am

how do u know this that the oil pump can handle up 76CCs? does this go for the elite oil pump to