MSD blaster coil for Spree / Elite

maddog · Post by **maddog** » Tue Nov 22, 2005 2:57 pm

I have been using the pump on my 76cc mini stroker for about 2 yrs now, but i safety wired it to full open, not using the cable.

maddog · Post by **maddog** » Tue Nov 22, 2005 3:01 pm

I have been using the pump on my 76cc mini stroker for about 2 yrs now, but i safety wired it to full open, not using the cable.

maddog · Post by **maddog** » Fri Dec 09, 2005 1:10 am

anybody install the blaster coil yet, i would like to know how it starts your engine in cold weather conditions!

deathwish · Post by **deathwish** » Fri Dec 09, 2005 7:29 am

well i put the spree away for the winter but im still looking for it but cant seem to find it yet

darat · Post by **darat** » Fri Dec 09, 2005 4:41 pm

so i could put my 70cc kit on the elite and use the stock oil pump?

maddog · Post by **maddog** » Sun Dec 11, 2005 12:16 am

Thats a 65cc kit they never made a 70cc kit for early elites and aeros, i also had an 8 to1 gear ratio, pipe and 18mm carb on my aero and i had no problems using the pump.

darat · Post by **darat** » Sun Dec 11, 2005 11:19 am

They have it on ebay right now and yes it is a 70cc. it is a polin

maddog · Post by **maddog** » Mon Dec 12, 2005 3:23 am

Thats funny cuz i have the same stock number for my kit only i have the corsa which is better than the contessa, the elite-s & kimco zx share the same bore & pipes and only mallossi made a 65cc kit for the early model scoots but good luck finding one, i would contact that guy before you buy!

darat · Post by **darat** » Mon Dec 12, 2005 6:59 am

here it is http://cgi.ebay.com/ebaymotors/POLINI-7 ... 9176QQrdZ1

Post by **noiseguy** » Mon Dec 12, 2005 9:37 am

Darar: You need to read that listing more carefully. It says an Aero kit is available, but it is not a 70cc kit, it's a 65cc.

A quick look at the Aero engine case and a BoreArea*Stroke=Displacement calculation will show you that you cannot put a 70cc piston into a stock Aero block; it doesn't have enough clearance.

darat · Post by **darat** » Mon Dec 12, 2005 10:19 am

this is for my elite not areo

Post by **noiseguy** » Tue Dec 13, 2005 12:05 am

I believe the stock bore/stroke is the same for your vintage Elite as the Aero.

darat · Post by **darat** » Tue Dec 13, 2005 9:25 am

it does not say anything on that site about a 65cc it is for a 70cc kit i looked at it.

Post by **noiseguy** » Tue Dec 13, 2005 12:22 pm

What's the piston diameter of the kit and the stock stroke of the engine?

darat · Post by **darat** » Tue Dec 13, 2005 7:45 pm

I emailed the the guy off of ebay and here is what he said>
Hi, yes this Polini kit will fit your 1987 SE50 honda elite scooter. Yes it is the big bore 70cc kit-it is the biggest kit that is made for the SE50 scooter.

Please let me know if you have any questions.

patrick
808 221-4267