OKO CT Manifold on an AF05E / SE/05 Block

This is the repository for hop-ups and mods for Elite and Spree. Look here for information on exhausts, porting, cylinders, intakes, and suspension mods.

Moderator: FAQ Moderator

Post Reply
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10933
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

OKO CT Manifold on an AF05E / SE/05 Block

Post by Wheelman-111 » Fri Apr 30, 2010 4:55 pm

Greetings:

Scooterwerx concocted one of these for himself, and swapped one to me:
Image
That's right, an AF05 with a CT Chrome manifold. You just need to fill the 1/8" gap to the inside with a plate of metal or composite material. This opens the door to any CT-compatible carb up to 34mm, not that you'll need that big on 65cc. But it can be done.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
Still Seeking Red PCX-150
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox, Carb and Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 99KPH

:coolcruise:

User avatar
Wheelman-111
Moderator
Moderator
Posts: 10933
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: OKO CT Manifold on an AF05E / SE/05 Block

Post by Wheelman-111 » Fri Apr 19, 2013 4:09 pm

Greetings:

MMeadows just PM-ed me that the Aero 80 reeds perform the same function and offer a bigger surface intake area. No direct info, but maybe he can post this in Performance Technical with pics and we'll move it here for Posterity.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
Still Seeking Red PCX-150
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox, Carb and Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 99KPH

:coolcruise:

Post Reply