Port timing for various Honda 50 scooters

This is the repository for hop-ups and mods for Elite and Spree. Look here for information on exhausts, porting, cylinders, intakes, and suspension mods.

Moderator: FAQ Moderator

Locked
User avatar
noiseguy
Site Admin
Site Admin
Posts: 4419
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:

Port timing for various Honda 50 scooters

Post by noiseguy »

From expressly mopeds. Port timing is critical on 2-strokes:
-----------------------------------------

the port timing of different honda engines

the NU50 express engine has these values exhaust port opens 67.5 degrees from top of stoke
scavenge opens 47.5 degrees from top of stroke
------------------------------------------------
on the Spree engine the exhaust port opens 71 degrees from top
and the scavenging port opens 52 degrees from top
------------------------------------------------
on the ELITE engine the exhaust port opens 80 degrees from top
and the scavenging port opens 56 degrees from top
-----------------------------------------------
the NA/NC engine exhausts port opens 65 degrees from top
and the scavenging port opens 47 degrees from top
-------------------------------------------------
the SR express /NX50 exhausts opens 67 degrees
scavenging port at 47 degrees

--- Jul 28, 2009 ---
Updated by: mousewheels
Reason: Add additional info

Terminology: BBDC = 'Before Bottom Dead Center', ABDC = 'After Bottom Dead Center'
All values are in degrees
Image
Admin, Hondaspree.net

Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Locked