What about a crank? This '96 is still a Japanese crank but I know the Taiwanese cranks had problems with the c16 RPMs.bakaracer wrote:dont mess with that pipe. get a good pipe for your jog. knowing you ,you will want it to go faster.that pipe will limit you to only 8.5hp max. thats with a top performance mid race kit. find yourself a yasuni c16,c20,c21 or stage6 pro or r1200 pipe. the yasuni with a mid race kit will make around 13hp.more than enough to go 70mph with a 70cc kit setup.Trafficjamz wrote:http://cgi.ebay.com/ebaymotors/ws/eBayI ... 613wt_1163
Is this pipe for a 1996 jog?
Is this pipe ok too loud for street use?
Just got a 1996 yamaha jog
Moderator: Moderator
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Just got a 1996 yamaha jog
motormike wrote:Errands become adventures.
Re: Just got a 1996 yamaha jog
from what I know the japanese cranks can handle the higher rpms than the zuma or taiwanese motors. if planing on building an engine to race or to make at least 13hp ,its best to upgrade the crank anyways. with these engines to make higher hp,you need to get the rpm's up.10k just won't cut it as alot of the pipes sold in the US does.the tecnigas next r and the leo pipes makes its power below 10k.Thats why dyno test show that they make max power around 8.5hp.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Just got a 1996 yamaha jog
I already bought the leo pipe.
I got the corsa kit too.
21mm carb and ct mani.
and this
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 2150wt_939
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Just got a 1996 yamaha jog
http://www.youtube.com/watch?v=eQyvkYiq ... re=related
Yasuni c20-c21 will not work on the corsa bore..
it will work on polini evo1/2 and malossi mhr single ring.
Just send a message to gb motorsource, He know lots of jog parts and give advice on parts recommend..
http://www.youtube.com/watch?v=F7ycKmTs ... er&list=UL
Yasuni c20-c21 will not work on the corsa bore..
it will work on polini evo1/2 and malossi mhr single ring.
Just send a message to gb motorsource, He know lots of jog parts and give advice on parts recommend..
http://www.youtube.com/watch?v=F7ycKmTs ... er&list=UL
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Just got a 1996 yamaha jog
Got more goodies for the jog build.
The motor has been cleaned up a bit too.
The motor has been cleaned up a bit too.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Just got a 1996 yamaha jog
find a rotor kit for it. frees up alot more power and rpms
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Just got a 1996 yamaha jog
rotor kit?bakaracer wrote:find a rotor kit for it. frees up alot more power and rpms
please explain.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Just got a 1996 yamaha jog
there are aftermarket rotor kits. this replaces the stock heavy mag and stator. the aftermarket ones are aluminum and weight about half the weight of the stock mag/flywheel. the ncy ones sell for about $250. the malossi ones are about $450. all the guys in europe that race minarelli motor bikes use rotor kits on their bikes. makes it rev up quicker and frees up rotational mass weight off the crank.so that means more hp too.every little counts in these small engines.
http://www.scooterpartsplace.com/ncy-al ... og-50.aspx
http://www.scooterpartsplace.com/ncy-al ... og-50.aspx
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Just got a 1996 yamaha jog
When you get to that level of performance, you should also remove the oil pump.bakaracer wrote:there are aftermarket rotor kits. this replaces the stock heavy mag and stator. the aftermarket ones are aluminum and weight about half the weight of the stock mag/flywheel. the ncy ones sell for about $250. the malossi ones are about $450. all the guys in europe that race minarelli motor bikes use rotor kits on their bikes. makes it rev up quicker and frees up rotational mass weight off the crank.so that means more hp too.every little counts in these small engines.
http://www.scooterpartsplace.com/ncy-al ... og-50.aspx
Last edited by eliteguy50 on Thu Dec 30, 2010 12:43 am, edited 1 time in total.
motormike wrote:Errands become adventures.
Re: Just got a 1996 yamaha jog
you can send stock flywheel lighten to battlescooter. $60.
Jog/vino does have a oil pump,crank driven by oil plastic drive. Oil pump need to removed.
Jog/vino does have a oil pump,crank driven by oil plastic drive. Oil pump need to removed.
- Gingerbread Man
- Spree
- Posts: 128
- Joined: Tue Apr 13, 2010 10:59 pm
- Location: Phoenix, AZ
Re: Just got a 1996 yamaha jog
I had my flywheel lighten from them.veedubh20 wrote:you can send stock flywheel lighten to battlescooter. $60.
Jog/vino does have a oil pump,crank driven by oil plastic drive. Oil pump need to removed.
- Attachments
-
- GEDC0026.JPG (121.13 KiB) Viewed 8118 times
-
- GEDC0024.JPG (131.79 KiB) Viewed 8118 times
2007 CH80
Re: Just got a 1996 yamaha jog
how was the lighten flywheel?
How that ride?
How that ride?
- Gingerbread Man
- Spree
- Posts: 128
- Joined: Tue Apr 13, 2010 10:59 pm
- Location: Phoenix, AZ
Re: Just got a 1996 yamaha jog
Having the flywheel lighten really did help. The acceleration is a little better. On the top-end is where the biggest difference was gained. It now reaches a higher RPM = more speed. Overall a very good investment for my Zuma.
2007 CH80
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Just got a 1996 yamaha jog
Gears. Where do i find them?
No one on ebay has them for the 96 jog?
No one on ebay has them for the 96 jog?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Just got a 1996 yamaha jog
Are there oil pump plugs for the 1996 jog?eliteguy50 wrote:When you get to that level of performance, you should also remove the oil pump.bakaracer wrote:there are aftermarket rotor kits. this replaces the stock heavy mag and stator. the aftermarket ones are aluminum and weight about half the weight of the stock mag/flywheel. the ncy ones sell for about $250. the malossi ones are about $450. all the guys in europe that race minarelli motor bikes use rotor kits on their bikes. makes it rev up quicker and frees up rotational mass weight off the crank.so that means more hp too.every little counts in these small engines.
http://www.scooterpartsplace.com/ncy-al ... og-50.aspx
Where could I find one?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight