Honda Spree and Elite 50 Forums

picked up a razz the other day,wont run but when i spray mixedgas into the carb it runs,so cleaned the carb real good and still nothing.im getting gas from the petcock but cant get any in the carb bowl.on my spree and aero the float needle moves up and down via the float but on the razz the float needle has a longer shaft coming out of it that you can push up in the needle its self(feels spring loaded)anyways the needle isnt moving when i move the float up and down just the small shaft.is this normal? btw my first time workin on a razz

ok figured out my own problem.the float valve was bad.the spring loaded part shoud only come out about half way and mine was coming out all the way,therefor not letting the valve drop down to let gas into the bowl