Honda Spree and Elite 50 Forums

Spmotostore.com

I am about to start working on a 04 or 05 zuma myself

Im on my 4th now.. Spmoto and scootercraft both ship fast and have lots of parts for these motors n scoots..i hit 64 on my old school vertical zuma.. It pulled on my first elite hard up top

graphite9 wrote:So, Im thinking of going one of two ways. either a kit like this


stage 6 with stage 6 crank

http://www.SPMOTOSTORE.COM/product_p/s6-7516602.htm

or something like this.

I don't know if the h20 cooled setup is worth it.

i thought the goal was just 55mph?

the AC polini kit can do that.

They are torque monsters so even a contessa will get you what your looking for.. Over range kit will make it yank hard

contesta is made for stock crank

You can use stock crank

We need to know what your 01 motor came from. Is it a vertical or a horizontal minarelli? Both can be made to pull hard but the parts are different. The '01 horizontal engines were made with Taiwan cranks. I would replace that just to be safe. They are known for breaking at higher RPMs.

dont get a stage6 crank, I heard they break!

get a polini crank and polin bearings. got on my motor 3,000 miles on it trouble free! I get 60mph gps with a stock carb 14mm LOL

If your not doing a real agressive cylinder n just want 55 with acceleration dont even swap your crank..

Mopedsplus.net has universal water pumps fans and radiators

a liquid cooled kit will always have more hp do to the lower temp- that is suggesting the same pore and same porting on both air and liquid model- i did a conversion on a vento triton- that bike was a rocket ship