Honda Spree and Elite 50 Forums

I have a 90 jog and I'm looking for an aftermarket exhaust to put on him. The problem is that everything that I can find is for the horizontal min, not the vertical. Performance vert min exhausts anyone?

Here's a link with a few that are under $200

I didn't get that link. Also, I found a few between $100 and $200 for a pre'02 Zuma, but I'm not sure if they bolt onto the frame the same even though both are vert mins.

Try spmotostore.com..

Yasuni makes mineralli vertical mufflers that should fit your motor. I have set up a few pre-bug zumas that have the same motor (vertical) and have worked well past my expectations. Try the Yasuni z or if you plan on going bigger with the bore, etc definitely go with the Yasuni R. Just my opinion. Spmoto like DSD has already said or try scoottunning.ca they have a variety of things for these motors.

I used the silent pro by technigas for my jog 90 clone engine but mine was a horizontal. I used sip scooters.

Are you saying a 1990 yamaha jog? Or jog 90 meaning the bigger horizontal minarelli? If you meant 1990 yamaha jog, you will need to customize a pipe..is your engine chain driven? The old style jogss that came vertical,use a different vertical minarelli than the zuma..im pretty sure its the vertical motor used on the yamaha razz as well..which is chain drive and tops at like 30,but still has the manifold bolted straight to the cylinder,just like the zuma vertical motor

This thread is old ha. I just noticed the 2013.

LOL yea, well for the record. Vertical Zuma prebug pipes do fit with a little modification (nothing more than a spacer here or there on the side mount. And, it is not the same motor as the razz. They are different the 1990 Jog is indeed variated. It uses a Jog 90(cc) variator (the 21mm drive boss not the 18mm) and regular horizontal mina Jog rear tourque driver.