i have a sym dd50 my drive face is hitting the convex part of the left crankcase cover so,
there is a circular scratch on my drive face, and one thing if i kick start. it won't contact to the driven gear,my driven gear is new.and if kick start the kick start arm won't go back to it proper position.if i luckily start it it was a lot of noise inside the left crankcase cover,i don't how to solve this pls help
problem on my starter?
Moderator: Moderator
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: problem on my starter?
any comment pls
- Wheelman-111
- Moderator
- Posts: 11322
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: problem on my starter?
Greetings:
Is the crankshaft moving around in there? Stripped threads on the drive end?
Is the crankshaft moving around in there? Stripped threads on the drive end?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: problem on my starter?
yes the crankshaft is moving around,where is the threads on the drive end?is that the drive gear?
- Wheelman-111
- Moderator
- Posts: 11322
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: problem on my starter?
Greetings:
You had me at "...yes the crankshaft is moving around". The crank shouldn't move - at all. I was referring to the threads on the crank end with that big 17mm nut that holds the outer pulley in place, but if the crank is moving the bearings need attention. Split the crankcase and evaluate.
You had me at "...yes the crankshaft is moving around". The crank shouldn't move - at all. I was referring to the threads on the crank end with that big 17mm nut that holds the outer pulley in place, but if the crank is moving the bearings need attention. Split the crankcase and evaluate.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: problem on my starter?
the drive end is not stripped,any ministroker that you know that No need to modify my crankcase just bolt and go,and what size?
- Wheelman-111
- Moderator
- Posts: 11322
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: problem on my starter?
Greetings:
If you want a reliable, long-lasting daily driver, get a new Honda crankshaft or try to find a Malossi Stock-Stroke shaft. If you want to experiment with port timing, decking the cylinder and take a guess at the optimum compression ratio, get a Ruima 44.1. Just be prepared for the possibility that you may someday need to push it home if you opt for Taiwanese parts..
If you want a reliable, long-lasting daily driver, get a new Honda crankshaft or try to find a Malossi Stock-Stroke shaft. If you want to experiment with port timing, decking the cylinder and take a guess at the optimum compression ratio, get a Ruima 44.1. Just be prepared for the possibility that you may someday need to push it home if you opt for Taiwanese parts..
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: problem on my starter?
thanks alot for the info. i have a honda elite af16e i am thinking to put that crankshaft on my sym dd50 crankcase,is that exact fit there.
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: problem on my starter?
if i have to premix and put oil plug what will i do to the vaccum hose connecting to the nipple port beside the starter i have sym dd they use fuel pump so do i need to shut down/plug also that vacuum hose and plug the nipple port. thanks