Page 1 of 1
Spree shock for very heavy rider
Posted: Sun Feb 28, 2016 7:45 pm
by CalvinB
Sorry but the title is a little bit click bait. I'm buliding a razz with zuma engine. Long story short I noobed it up and made all my brackets using a stock spree shock. Turns out the stock spree spring rate is nowhere near what i need. Are there any shocks that have a much higher spring rate than the stock shock, but have the same eye to eye?
Re: Spree shock for very heavy rider
Posted: Sun Feb 28, 2016 11:37 pm
by benji
I think you can get an adjustable air shock for a ruckus, and that should work.
Re: Spree shock for very heavy rider
Posted: Tue Mar 08, 2016 11:47 am
by burnt_toast
benji wrote:I think you can get an adjustable air shock for a ruckus, and that should work.
that sounds like $$$
Re: Spree shock for very heavy rider
Posted: Tue Mar 08, 2016 5:14 pm
by EastCoastCB
Is the spree shock similar to a ch80? if so there are shocks out there that will work.
Re: Spree shock for very heavy rider
Posted: Tue Mar 08, 2016 6:22 pm
by benji
burnt_toast wrote:benji wrote:I think you can get an adjustable air shock for a ruckus, and that should work.
that sounds like $$$
Hahaha, yes it is. I think like $100-200. It's not really worth it, but I'd like to have a bad * doppler air shock or some kinda remote reservoir racing shock just for the look haha.
Re: Spree shock for very heavy rider
Posted: Tue Mar 08, 2016 6:25 pm
by benji
I think most shocks from other scooters will,just make sure the eyelets are the same size
Get this one! A Lil pricy tho...
http://scootertuning.ca/en/suspensions/ ... range.html
Re: Spree shock for very heavy rider
Posted: Tue Mar 08, 2016 7:17 pm
by EastCoastCB
