Blown old head gasket finally? Any advice?

Need help with your non-Honda scooter? Yamaha, etc? Post here!

Moderator: Moderator

Post Reply
NB50clonePGO6GOD
Goped
Goped
Posts: 84
Joined: Sat Feb 06, 2016 6:49 pm
Location: SEATTLE, WA

Blown old head gasket finally? Any advice?

Post by NB50clonePGO6GOD » Fri Mar 04, 2016 5:45 pm

-,- so I do have a new head gasket the thing is how do i estimate 8ft lbs after snugging the head bolts by hand. The old head gasket was doubled which i know its only suppose to be one.

The nb50 head gaskets dont contain adhesive sealant on either side and the head is milled im concerned that the heads out of spec had to stop a few feet from oriely cause it had a lawn mower sound.


In additoon does anyone have an extra nb50 head laying around im skeptical on the sqish after mill.
People playing with my clone I let it slide with em, still tipping on 3.0's belt ramping the CVT ON PGOS!


Too quick, TURN UP!

User avatar
vintagegarage
Elite
Elite
Posts: 601
Joined: Tue Jun 23, 2015 7:03 pm
Location: Florida

Re: Blown old head gasket finally? Any advice?

Post by vintagegarage » Fri Mar 04, 2016 7:21 pm


NB50clonePGO6GOD
Goped
Goped
Posts: 84
Joined: Sat Feb 06, 2016 6:49 pm
Location: SEATTLE, WA

Re: Blown old head gasket finally? Any advice?

Post by NB50clonePGO6GOD » Fri Mar 04, 2016 7:34 pm

vintagegarage wrote:My advice is to buy one of these:

http://www.ebay.com/itm/252137453352?ru ... 26_rdc%3D1


Ill buy it from auto zone was wandering about those types._
People playing with my clone I let it slide with em, still tipping on 3.0's belt ramping the CVT ON PGOS!


Too quick, TURN UP!

Post Reply