Need More Topend!!!!!

Need help with your non-Honda scooter? Yamaha, etc? Post here!

Moderator: Moderator

Post Reply
SymnatiionBoyee
Noob
Noob
Posts: 1
Joined: Mon Mar 07, 2016 7:27 am
Location: Pearl City

Need More Topend!!!!!

Post by SymnatiionBoyee »

fastest I've got my bike to hit is 69mph and I'm trying to go faster with parts that i have before having to buy upgrades to make it faster....share your thoughts....

Sym Dd Block
Stock Crank
7:4 Gearing
72cc Polini Corsa(Ported)
Pg Long Pipe(Fliped Cone)
28oko Carburetor
55Pilot 138Main
1 1/2 Air Fuel Mixture
Stock Clutch
1,000 Center Spring
3,000 Clutch Springs
Kelli Pulley/Ramp
33 Gram Weights
Polini Blue Ramp Guides
Cmoped9
Spree
Spree
Posts: 117
Joined: Fri Mar 27, 2015 10:13 am
Location: Wisconsin

Re: Need More Topend!!!!!

Post by Cmoped9 »

Just going off what others have said, and g9 did the dyno. The PG is not a top end pipe, so I've heard, don't take my word on that, as I do not know from personal experience, but you could probably spin a higher RPM with a better pipe. As for your original question, I have no idea. 69mph is only a dream of mine.
2000 Elite SR
Malossi Cast, 24mm Polini (36/110), 9.8 gears, Naraku intake, PG long exhaust, 6k yellow Polini clutch springs, 5g roller weights. Top speed: 60mph
User avatar
bonesv
Moderator
Moderator
Posts: 2127
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: Need More Topend!!!!!

Post by bonesv »

Those Keli ramp plates are not the best by any means. Try an SEF ramp plate and use a new Honda oem belt.
I can get my elite going 69 mph on a malossi cast, 26 oko, pg short, polini vari, sef plate, w/8.44's!
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Meloshameless
Elite
Elite
Posts: 392
Joined: Mon Feb 01, 2016 11:04 pm
Location: beaverton, or

Re: Need More Topend!!!!!

Post by Meloshameless »

I hit 70 with my stock crank and gears, its all about having a quality pipe, carb, intake, vari. And cdi helps... G9 just got arrow pipes!
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
veedubh20
CB900F
CB900F
Posts: 2052
Joined: Sat Dec 31, 2005 7:00 pm
Location: Honolulu paradise island

Re: Need More Topend!!!!!

Post by veedubh20 »

lose weight rider . :coolcruise:
1man8scoots
CB900F
CB900F
Posts: 1485
Joined: Wed Mar 18, 2015 11:49 am
Location: usa

Re: Need More Topend!!!!!

Post by 1man8scoots »

More aggressive porting. Who did the porting and what is the timing now? With those gears you need some torque. Might want to try a different pipe to match the porting you have currently.
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Need More Topend!!!!!

Post by Wheelman-111 »

Greetings:

Not that 69 isn't a respectable top speed for 72ccs, but before seeking further modifications I suggest you determine what are the limiting factors in the build you have now. Top speed is determined in part by gearing, but more so by maximum engine RPM. So, what is the RPM reading at 69 MPH? Corsas love to rev, and as some have suggested the Long PG isn't the best-suited pipe for achieving the 11K-12K of which the Corsa is capable.

The gearing thing matters if you're fully shifting the belt-drive, and you may not be if you're pulling against 7.somethings. Sharpie your Drive and Driven Faces to see if the belt travels all the way to the rim in front, and to center out back. Now I'm not sure about hitting 70 with Stock 12:1 gears, but Flash 3.26 saw its best top speed with 7.97s, and today I believe it might've been faster with 8.2s or even 8.44s if the RPM increased back into the peak power zone for an unported Corsa.

Finally, although Big Carbs are popular in the Sandwich Islands - perhaps that dense Hawai'ian air allows for more fuel to mix - 28 is an awful lot of carb for 72ccs. It might run, but almost certainly not very efficiently. Consider a 26 or even a 24 for cleaner-running through the rev range.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Need More Topend!!!!!

Post by Trafficjamz »

Meloshameless wrote:I hit 70 with my stock crank and gears, its all about having a quality pipe, carb, intake, vari. And cdi helps... G9 just got arrow pipes!


You hit 70 on stock gears? :bs:

stock gears would have to spin at nearly 15k to go 70 mph.

Maybe you did 70 kph on stock gears. :lol:
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Need More Topend!!!!!

Post by Trafficjamz »

veedubh20 wrote:lose weight rider . :coolcruise:
and get taller gears. :wink:

If you don't weigh much, tall gears can get you over 70mph
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Meloshameless
Elite
Elite
Posts: 392
Joined: Mon Feb 01, 2016 11:04 pm
Location: beaverton, or

Re: Need More Topend!!!!!

Post by Meloshameless »

Yes, my trail tech vapor showed it hit 71.4 and 12,680 rpm on my set up and i also only weigh 125. B4 the guage i used a gps phone app which said i hit 65 only cuz i kept catching up to traffic and then has to get off the freeway, which im not supposed to be on in the 1st place.
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
Post Reply