Need help with your non-Honda scooter? Yamaha, etc? Post here!

Moderator: Moderator

Post Reply
Posts: 1
Joined: Mon Jun 13, 2016 4:50 am
Location: Honolulu


Post by Last808king » Mon Jun 13, 2016 5:50 am

I got a dd50 with an oil tank, and just bought a 72 polini corsa bore. I was wondering will the oil tank affect and make my bore seize?

Posts: 280
Joined: Fri Feb 26, 2016 4:02 am
Location: Hawaii

Re: Dd50

Post by Peteyparado » Mon Jun 13, 2016 6:07 am

Plug the pump an run premix
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears

User avatar
Posts: 11105
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Dd50

Post by Wheelman-111 » Mon Jun 13, 2016 3:27 pm


The pump is designed by Honda/Kymco to supply oil for 49ccs. When you enlarge the cylinder by 8mm in diameter, that quantity of oil is spread too thin. You must increase the quantity of oil per stroke. Since you can't easily recalibrate the pump, that means you have to add some oil to the fuel. One ounce or a bit more per gallon seems to do the trick, but a lot of tuners prefer to ditch the pump - and the little power it subtracts from the output shaft - altogether and premix an known-safe ratio. Many of us choose to run pump-free and pre-mix 32:1, or about 4 ounces per gallon.
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": 2003 Vespa ET4 150 62MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox, Carb and Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH

Post Reply