Purchased another one - 2001 Elite with a bunch of parts
Moderator: Moderator
Purchased another one - 2001 Elite with a bunch of parts
Most of the plastics are trashed but I think I am just going to use this as a parts bike. It does have the AF16E engine, a big bore kit (guy said it was 86cc) and an OKO carb. Everything else is pretty busted up but I do have a 1995 SA50 I have been working on also. Is one chassis better then the other 2001 vs 1995?
It did come with an extra stock crank so i am hoping it has a stroker crank. It also has these pretty cool wheels, the one on the back has been painted yellow but this Silver one looks good. I am assuming that this is the front rim? Ohyea, it also has a PG Speedo jammed in the dash... literally!
This came from Maryland in a trade for a Tomos moped originally. The guy I bought it from today said the ppl he traded it from were pretty serious about these scoots so if you are on this board.. the scooter is a 2001, pretty much all black, with yellow wheels. Stock front and this type of rear. I gave the guy 200 for it, wish it had a left side skirt!!!
I will post more pictures and will have some parts available. The seat is in ok condition.
It did come with an extra stock crank so i am hoping it has a stroker crank. It also has these pretty cool wheels, the one on the back has been painted yellow but this Silver one looks good. I am assuming that this is the front rim? Ohyea, it also has a PG Speedo jammed in the dash... literally!
This came from Maryland in a trade for a Tomos moped originally. The guy I bought it from today said the ppl he traded it from were pretty serious about these scoots so if you are on this board.. the scooter is a 2001, pretty much all black, with yellow wheels. Stock front and this type of rear. I gave the guy 200 for it, wish it had a left side skirt!!!
I will post more pictures and will have some parts available. The seat is in ok condition.
- Attachments
-
- newwheel2.jpg (52.22 KiB) Viewed 5880 times
-
- newwheel.jpg (68.44 KiB) Viewed 5880 times
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Purchased another one - 2001 Elite with a bunch of parts
This wheel came from a honda scooter? Rear wheels have splines one the inside.Snowman94 wrote:Most of the plastics are trashed but I think I am just going to use this as a parts bike. It does have the AF16E engine, a big bore kit (guy said it was 86cc) and an OKO carb. Everything else is pretty busted up but I do have a 1995 SA50 I have been working on also. Is one chassis better then the other 2001 vs 1995?
It did come with an extra stock crank so i am hoping it has a stroker crank. It also has these pretty cool wheels, the one on the back has been painted yellow but this Silver one looks good. I am assuming that this is the front rim? Ohyea, it also has a PG Speedo jammed in the dash... literally!
This came from Maryland in a trade for a Tomos moped originally. The guy I bought it from today said the ppl he traded it from were pretty serious about these scoots so if you are on this board.. the scooter is a 2001, pretty much all black, with yellow wheels. Stock front and this type of rear. I gave the guy 200 for it, wish it had a left side skirt!!!
I will post more pictures and will have some parts available. The seat is in ok condition.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Purchased another one - 2001 Elite with a bunch of parts
It came WITH the scooter. The rear splined wheel is mounted.
- z50r-ghost
- CB900F
- Posts: 1191
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: Purchased another one - 2001 Elite with a bunch of parts
Snowman,
Could you post up a pic of your PG dash? Sounds like a cool part...
-thanks man, jon
Could you post up a pic of your PG dash? Sounds like a cool part...
-thanks man, jon
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
Re: Purchased another one - 2001 Elite with a bunch of parts
yeah!! post more pics, this thing sounds pretty sweet.
Re: Purchased another one - 2001 Elite with a bunch of parts
This purchase i just hope to break even.. EVERYTHING is broken on it. Like they went out of their way to smash it all... Kind of reminds me when I was 15, twenty years ago.. I think if i blueprint the carb, i may use it but here it is....Maybe the cylinder is good, i dont know - just been busy with other stuff not to pull it yet.
- Attachments
-
- scootereww.jpg (68.19 KiB) Viewed 5746 times
-
- carbresized.jpg (175.15 KiB) Viewed 5745 times
-
- 112profile.jpg (118.74 KiB) Viewed 5746 times
Re: Purchased another one - 2001 Elite with a bunch of parts
it looks like you could get the motor running, all the necessary parts are there... from what i can see..
the carb looks fine, just a little dirty, i'd recommend a good cleaning!
the carb looks fine, just a little dirty, i'd recommend a good cleaning!
Re: Purchased another one - 2001 Elite with a bunch of parts
I think I am just going to take it apart and throw away the pieces that are broken. If anyone needs a frame, let me know.
Re: Purchased another one - 2001 Elite with a bunch of parts
i'll take that PG Speedo!
Re: Purchased another one - 2001 Elite with a bunch of parts
what would you sell the engine for?
Re: Purchased another one - 2001 Elite with a bunch of parts
Here are some more pictures of the carnage. Really, everything has damage in one way or another it seems but there is some good news. There seems to be a big bore of some sort on it but the bad news is that the middle of the piston has a dent in the middle, probably just running it with too long of a spark plug. There is a picture of it next to a malossi 70cc i found in the part bin, no rings but it appears to be in ok shape. I think the best news is that it has a full ZX tranny in it already too. At least i am pretty sure they are all ZX parts... I also took a picture of the crank as best as I could, it appears to not be stock but I cant tell for sure if it is a mini stroker or full stroker. One picture of the bunch of parts is pretty much all I am keeping or selling, the plastics fills up a decent sized trash can. I do have a decent seat and pretty nice met. box. It was fun overall
- Attachments
-
- jugssized.jpg (77.32 KiB) Viewed 5683 times
-
- Anyone see this crank
- crankrisized.jpg (79.44 KiB) Viewed 5683 times
-
- notice the dremel that got away.. i think it was this guys "mark" everything has an issue
- speedoPG.jpg (92.08 KiB) Viewed 5683 times
Re: Purchased another one - 2001 Elite with a bunch of parts
Here are three more.
- Attachments
-
- partssized.jpg (100.53 KiB) Viewed 5678 times
-
- strippedresized.jpg (125.74 KiB) Viewed 5678 times
-
- Pretty sure these are from the ZX
- zxtrannyresized.jpg (74.86 KiB) Viewed 5678 times
Re: Purchased another one - 2001 Elite with a bunch of parts
More
- Attachments
-
- partsrezised2.jpg (92.89 KiB) Viewed 5669 times
-
- enginceresized2.jpg (110.3 KiB) Viewed 5669 times
-
- scooterresized.jpg (117.13 KiB) Viewed 5669 times