my 86 spree project
Moderator: Moderator
- Normanspree
- Noob
- Posts: 7
- Joined: Mon Mar 07, 2011 9:37 pm
- Location: Corvallis OR
my 86 spree project
this is my custom 86 spree. Tell me what you think. Haven't done much, but For now (since im poor) im just kinda messing around with it. I swapped the handle bars, removed the front fender, and repacked the headset while I was at it. looks kinda tacky at the moment, but its a work in progress. I want to add a bullet headlight and find a better spot for the spedo. ill throw up some more pictures soon. comments? suggestions?
- killerpancake
- Spree
- Posts: 240
- Joined: Thu Dec 30, 2010 11:33 pm
- Location: Grand Rapids, MI
Re: my 86 spree project
Very nice Project. thinking about any engine mods to go as fast as it looks?
If it don't fit, force it. If it breaks, it needed to be replaced anyway.
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
- Normanspree
- Noob
- Posts: 7
- Joined: Mon Mar 07, 2011 9:37 pm
- Location: Corvallis OR
Re: my 86 spree project
yah, but like I said, im poor lol. maybe a better intake and exhaust. Tho I haven't put a whole lot of research into what you can do with these things.
- Petrock's 1984 Spree
- Elite
- Posts: 768
- Joined: Wed Dec 01, 2010 10:20 pm
- Location: Iowa
Re: my 86 spree project
Intake and exhaust wise, things have to be custom made as of now. LAter on down the road things will be there for those im sure
What there is for the spree engine is the 44mm and 48mm big bore kit that a member, tazland001, sells.
He also sells a set of aftermarket gears for the engine.
PM him and he will make you a deal.
If your mechanically inclined you can do the front pulley mod, which is on the wikispreedia page and some other cool stuff.
With some perfromance mods the limit for the Spree engine hovers around high 30s, low 40s.
If you want higher speeds than that i suggest an engine swap
Nice scoot, and welcome
What there is for the spree engine is the 44mm and 48mm big bore kit that a member, tazland001, sells.
He also sells a set of aftermarket gears for the engine.
PM him and he will make you a deal.
If your mechanically inclined you can do the front pulley mod, which is on the wikispreedia page and some other cool stuff.
With some perfromance mods the limit for the Spree engine hovers around high 30s, low 40s.
If you want higher speeds than that i suggest an engine swap
Nice scoot, and welcome
Complete NOOB, sorry dudes
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
- Normanspree
- Noob
- Posts: 7
- Joined: Mon Mar 07, 2011 9:37 pm
- Location: Corvallis OR
Re: my 86 spree project
nice! thanks. yah, from what ive seen, engine swaps seem like the way to go. Tho I am pretty surprised at how much more fun it is with just the handle bar swap! it has a way better stance, I almost feel like it needs some kind of foot pegs further back. I saw one member totally stripped his down to just the frame and added a top bar and some foot pegs. looks like a lot of fun.
- Petrock's 1984 Spree
- Elite
- Posts: 768
- Joined: Wed Dec 01, 2010 10:20 pm
- Location: Iowa
Re: my 86 spree project
Yeah dude go for it.
If you haven't already download the service manual for the Spree from here on the forum. Then just follow the diagrams and what not and the tear down is real simple
If you haven't already download the service manual for the Spree from here on the forum. Then just follow the diagrams and what not and the tear down is real simple
Complete NOOB, sorry dudes
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
- Normanspree
- Noob
- Posts: 7
- Joined: Mon Mar 07, 2011 9:37 pm
- Location: Corvallis OR
Re: my 86 spree project
sweet! that could come in real handy. especially wiring diagrams. tho by now I have most of the thing memorized lol. its ridiculous how much of the bike i had to tear apart just to get the front fender off lol. I literally had to take half of the bike apart.
Re: my 86 spree project
Welcome! Definitely a unique look with the mods.
Figures, less than a year after I move out of town another member shows up in Corvallis!
Figures, less than a year after I move out of town another member shows up in Corvallis!
1986 Spree w/ '87 SE50 motor
1985 Aero 50 w/ Dio motor: On Hold
1985 Aero 50 w/ Dio motor: On Hold
- Normanspree
- Noob
- Posts: 7
- Joined: Mon Mar 07, 2011 9:37 pm
- Location: Corvallis OR
Re: my 86 spree project
haha, crazy, they seem to be catching on around here actually. I know a couple people who have them and i see a few more riding around.
Re: my 86 spree project
sb50 intake and reeds fit with no other mods and add just a touch better air flow. by the way welcome to the forum and that sorta reminds me of a home made chopper that was running around town here. what a great look. as for speedo. check in to a vapor speedo. all digital and thin that will look great on those drag bars
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
- Petrock's 1984 Spree
- Elite
- Posts: 768
- Joined: Wed Dec 01, 2010 10:20 pm
- Location: Iowa
Re: my 86 spree project
If i were you I'd just wait.
Tazland001, same guy that makes the bbk and gears, it releasing a custom intake and carb for the spree in less than 60 days so if you can be a little patient id wait
Tazland001, same guy that makes the bbk and gears, it releasing a custom intake and carb for the spree in less than 60 days so if you can be a little patient id wait
Complete NOOB, sorry dudes
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
- Petrock's 1984 Spree
- Elite
- Posts: 768
- Joined: Wed Dec 01, 2010 10:20 pm
- Location: Iowa
Re: my 86 spree project
Hey, you had to take the steering stem out to get the front fender off. And you had to undo that funky non- hex nut that has three notches in it.
How did you get that sucker back on there tight?
How did you get that sucker back on there tight?
Complete NOOB, sorry dudes
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
Re: my 86 spree project
He also has a pipe for the Spree coming too.Petrock's 1984 Spree wrote:If i were you I'd just wait.
Tazland001, same guy that makes the bbk and gears, it releasing a custom intake and carb for the spree in less than 60 days so if you can be a little patient id wait
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: my 86 spree project
if your not looking to buy taz intake cant you port yours to performe better than the sb50 .and then you wont need to tap in a nipple for the spree oiler system
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
- spree-rider
- Elite
- Posts: 693
- Joined: Tue Nov 03, 2009 8:24 pm
- Location: Burien, WA
Re: my 86 spree project
wrong. it would work the same if not almost the same. and you could just buy the sb50 carb as well wich has the oiler nipple on it.
86 spree
sb 50 intake and reeds
3.00x10 rear tire
waxed
99Polaris indy 700
harliquim paint
2" bar riser
lefty throttle
ice scratchers
SLP tri keel skis
ported
high compression head
chrome low windshield
mountain bar
Xtra-10
I ALWAYS KEEP ONE ROLLED
sb 50 intake and reeds
3.00x10 rear tire
waxed
99Polaris indy 700
harliquim paint
2" bar riser
lefty throttle
ice scratchers
SLP tri keel skis
ported
high compression head
chrome low windshield
mountain bar
Xtra-10
I ALWAYS KEEP ONE ROLLED