![Image](http://img706.imageshack.us/img706/3115/258js.jpg)
![Image](http://img863.imageshack.us/img863/4889/259w.jpg)
![Image](http://img715.imageshack.us/img715/9098/260bb.jpg)
![Image](http://img860.imageshack.us/img860/6072/262b.jpg)
![Image](http://img535.imageshack.us/img535/1294/264m.jpg)
everything on the af16e motor is stock besides a high variator,80jet and the home made air filter. the spree reaches speeds of about 40 as the speedo goes to the very end of the white line past the 35 mark.
Moderator: Moderator
thanks! i used the elite hanger but cut the clutch cover side off a bit to fit down in the spree frame while centering the back wheel perfectly with the frame its pretty much a no brainer. the wiring was simple for the stator. i just cut off the connector from the spree stator and used the colors of the wires to the elite stator. the wire colors for both the spree and elite r the same. the bystarter is from the elite so i just cut the wires and reversed them so it would be yellow and green. im using the elite rectifier because the rectifier from the spree kept blowing tail lights and head light. i now have a modified head lamp for halogen bulbs. easy change in and out.Wheelman-111 wrote:Greetings:
Nice work MW. Turned the unpretentious Spree into a vehicle that'll hold its own in city traffic.
The engine hanger looks good!
i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
How much for everything but the top end and crank with he shrouds?monkeywrench wrote:i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
id say 50.00 plus shippingTrafficjamz wrote:How much for a case?
the shrouds i have r crap! but for the stator carbs intake and cases. id say 80.00 plus shipping.xxjareebxx wrote:How much for everything but the top end and crank with he shrouds?monkeywrench wrote:i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
ill line up everything i have tommarow and take picksxxjareebxx wrote:How much for everything but the top end and crank with he shrouds?monkeywrench wrote:i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
ok! i didnt plan on selling so i can wait tell wednesday. dont really need the money but i need to get rid of some stuff.xxjareebxx wrote:Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
Alright sweetmonkeywrench wrote:ok! i didnt plan on selling so i can wait tell wednesday. dont really need the money but i need to get rid of some stuff.xxjareebxx wrote:Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
i will do this tommarow as it is pouring rain right nowfastplastic wrote:Take some pics of how kick stand it mounted