finally done a spreedio
Moderator: Moderator
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
finally done a spreedio
well i had the spree for a few months with a bad engine( hole in the case) so i decided to build a dio spree since i have 5 dio motors laying around. bad thing was is i didnt have a good crank for all the dio cases i have. i finally got a good crank and also bought bearings, seals and so on and so on.
everything on the af16e motor is stock besides a high variator,80jet and the home made air filter. the spree reaches speeds of about 40 as the speedo goes to the very end of the white line past the 35 mark.
everything on the af16e motor is stock besides a high variator,80jet and the home made air filter. the spree reaches speeds of about 40 as the speedo goes to the very end of the white line past the 35 mark.
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: finally done a spreedio
Greetings:
Nice work MW. Turned the unpretentious Spree into a vehicle that'll hold its own in city traffic.
The engine hanger looks good!
Nice work MW. Turned the unpretentious Spree into a vehicle that'll hold its own in city traffic.
The engine hanger looks good!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
Re: finally done a spreedio
thanks! i used the elite hanger but cut the clutch cover side off a bit to fit down in the spree frame while centering the back wheel perfectly with the frame its pretty much a no brainer. the wiring was simple for the stator. i just cut off the connector from the spree stator and used the colors of the wires to the elite stator. the wire colors for both the spree and elite r the same. the bystarter is from the elite so i just cut the wires and reversed them so it would be yellow and green. im using the elite rectifier because the rectifier from the spree kept blowing tail lights and head light. i now have a modified head lamp for halogen bulbs. easy change in and out.Wheelman-111 wrote:Greetings:
Nice work MW. Turned the unpretentious Spree into a vehicle that'll hold its own in city traffic.
The engine hanger looks good!
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80
-
- Goped
- Posts: 88
- Joined: Sun Apr 10, 2011 11:12 pm
- Location: US
Re: finally done a spreedio
Looks real nice, would you sell one of your dios with a bad crank?
1990 honda elite soon to be dio swap
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
Re: finally done a spreedio
i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: finally done a spreedio
How much for a case?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Goped
- Posts: 88
- Joined: Sun Apr 10, 2011 11:12 pm
- Location: US
Re: finally done a spreedio
How much for everything but the top end and crank with he shrouds?monkeywrench wrote:i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
1990 honda elite soon to be dio swap
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
Re: finally done a spreedio
id say 50.00 plus shippingTrafficjamz wrote:How much for a case?
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
Re: finally done a spreedio
the shrouds i have r crap! but for the stator carbs intake and cases. id say 80.00 plus shipping.xxjareebxx wrote:How much for everything but the top end and crank with he shrouds?monkeywrench wrote:i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
Re: finally done a spreedio
ill line up everything i have tommarow and take picksxxjareebxx wrote:How much for everything but the top end and crank with he shrouds?monkeywrench wrote:i could sell one. they are just cases though ive taken the cranks out of them. i also have the intakes reed blocks and carbs for them but they r all seperated from the cases. also have the stators for them. basically have everything except cylinders pistons and cranks.xxjareebxx wrote:Looks real nice, would you sell one of your dios with a bad crank?
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80
-
- Goped
- Posts: 88
- Joined: Sun Apr 10, 2011 11:12 pm
- Location: US
Re: finally done a spreedio
Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
1990 honda elite soon to be dio swap
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
Re: finally done a spreedio
ok! i didnt plan on selling so i can wait tell wednesday. dont really need the money but i need to get rid of some stuff.xxjareebxx wrote:Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80
-
- Goped
- Posts: 88
- Joined: Sun Apr 10, 2011 11:12 pm
- Location: US
Re: finally done a spreedio
Alright sweetmonkeywrench wrote:ok! i didnt plan on selling so i can wait tell wednesday. dont really need the money but i need to get rid of some stuff.xxjareebxx wrote:Alright ill take it but could you wait till like Wednesday still have some scoots that could be a dio
1990 honda elite soon to be dio swap
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
looking for a dio engine anyone have one for sale?
selling a 1990 honda elite engine runs great shoot me an offer.
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: finally done a spreedio
Take some pics of how kick stand it mounted
- monkeywrench
- Spree
- Posts: 214
- Joined: Sat Dec 01, 2007 6:26 pm
Re: finally done a spreedio
i will do this tommarow as it is pouring rain right nowfastplastic wrote:Take some pics of how kick stand it mounted
here kitty kitty kitty
http://www.youtube.com/warmonkey80
http://www.youtube.com/warmonkey80